Author Topic: Frommia 635 table saw: information needed  (Read 766 times)

0 Members and 1 Guest are viewing this topic.

Offline abates

  • Posts: 51
Frommia 635 table saw: information needed
« on: January 18, 2019, 09:15 AM »
Hi all, looking at a Frommia 635 table saw.  Used to have a slider but is missing.  I don't need the slider part.  Mostly I was wondering if anyone had information on the company or the saw?  It looks like a nice saw and the price is right for it.  Dust collection?  Arbor size?  Mostly cast iron or sheet metal?  Were these good saws?  Any help will be appreciated.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline TinyShop

  • Posts: 344
Re: Frommia 635 table saw: information needed
« Reply #1 on: January 18, 2019, 10:01 AM »
Manufacturer:  https://frommia.com/

A thread worth translating in which the manufacturer basically warns someone in your same position against acquiring a used machine - apparently, there is zero support available for same:

https://www.woodworking.nl/showthread.php?17382-Gezocht-handleiding-Frommia-630
« Last Edit: January 18, 2019, 10:06 AM by TinyShop »
ETS 150/5 EQ (DE) [po], TS 75 EQ (DE) [po], OF 1400 EQ-F (DE) [n], CXS (DE) [n], CMS-GE [DE] [po], CMS TS 75 (DE) [n], LA-CS 50/CMS (DE) [po], VB-CMS (DE) [n], MFT/3 (CZ) [n], DF 700 EQ w/Seneca Small Mortise Kit (DE) [po], FEIN Multimaster 350 QSL (DE) [n], Bosch 1274DVS w/dust collection, sanding frame,  stand & fence (CH) [n], BOSCH 1590EVS w/dust collection (CH) [n], CS Unitec CS 1445 HEPA extractor <re-branded Starmix ISP 1435 H> (DE) [n], CT SYS (DE) [po], Milwaukee 0302-20 (US) [n], Two (2) Porter Cable 862 (TW) [n], Porter Cable 447 (US) [n], Zyliss Vise (CH) [n], Hitachi C 8FB (JP) [h]

[po] pre-owned   [n] new   [h] heirloom   (XX) country of origin

Offline Job and Knock

  • Posts: 155
Re: Frommia 635 table saw: information needed
« Reply #2 on: January 18, 2019, 04:37 PM »
if it's any help Frommia was/is a manufacturer of mid-market static machinery aimed at small to medium sized joiners shops. your 635 is very old - 1960s or 70s - so there will be no manuals or spares or support for it. If you are mechanically and electrically adept and know what to look for in terms of acceptable wear and tear, damage, etc that shouldn't be a problem. If you need the user's handbook before you an look at a machine I'd suggest steering clear of all old machinery. It will only bring you pain
Simplicity is the embodiment of purity and unity
- Shaker maxim

TS 55 - TS75 - Kapex KS120 - OF1010 - OF2200 - Rotex RO150e - Domino DF500Q -  Domino DF700XL