Author Topic: Festool stack (Read 14628 times)

guitar_ed · « **on:** January 12, 2015, 12:40 PM »

Hi All,

This is my "stack of Festool." It's not as glorious as some, but it is the tools I use most often.

OF200 Router, RO-125 sander, and Domino 500 are the tools.
Router bits, sand paper, and Domino's are the 3 accessory systainers.

On top is an old brief case repurposed with foam to hold some squares, and other precision measuring tools.

Later,

edg

bigchas · « **Reply #1 on:** January 12, 2015, 01:01 PM »

I've added a few items since this was taken but this is at the limit without it being tied to a larger structure.

ChrisK1970 · « **Reply #2 on:** January 30, 2015, 05:47 PM »

Here's mine.....

ChrisK1970 · « **Reply #3 on:** January 30, 2015, 05:48 PM »

I've got a couple of midis and mobile bases but didn't throw those in. I just took the photo and it's snowing out. Now....my back hurts

mwildt · « **Reply #4 on:** January 30, 2015, 06:29 PM »

Then it's good you have the first aid Systainer handy

przeniek · « **Reply #5 on:** January 30, 2015, 06:42 PM »

Is it an public measuring of penises?

Forgive me but I could not refrain from associations - my bigger!

sae · « **Reply #6 on:** January 30, 2015, 06:46 PM »

Works better w/ the classics on the bottom...

mike_aa · « **Reply #7 on:** January 30, 2015, 07:21 PM »

Quote from: ChrisK1970 on January 30, 2015, 05:47 PM

Here's mine.....

Chris,
I don't know what's more amazing. The height of that stack or the fact that you actually went through all the trouble of stacking them in the snow! LOL! You've been busy amassing some green stuff.
Mike A.

elfick · « **Reply #8 on:** January 30, 2015, 08:00 PM »

Chris, I think the Mirka Systainer near the top is cheating since this is supposed to be Festool stacks.

rst · « **Reply #9 on:** January 30, 2015, 08:31 PM »

I have 56 systainers now (not all Festools) but don't have a ladder tall enough to stack...maybe a high lift?

mike_aa · « **Reply #10 on:** January 30, 2015, 08:45 PM »

Quote from: przeniek on January 30, 2015, 06:42 PM

Is it an public measuring of penises?
Forgive me but I could not refrain from associations - my bigger!

Przeniek,

Welcome to the FOG! And that is funny!

ChrisK1970 · « **Reply #11 on:** January 30, 2015, 08:47 PM »

Quote from: sae on January 30, 2015, 06:46 PM

Works better w/ the classics on the bottom...

Yeah. Thanks. Where were you for this stupid picture?!?!?!?!?!? I forgot I had a couple of Systainers upstairs for a bedroom remodel. Then I remembered "oh...get the Dominos!"

ChrisK1970 · « **Reply #12 on:** January 30, 2015, 08:49 PM »

Quote from: przeniek on January 30, 2015, 06:42 PM

Is it an public measuring of penises?
Forgive me but I could not refrain from associations - my bigger!

Well.....duh. I'd win that one! Oh....wait a second...I got the shaft when it came to my 25% Italian heritage.

ChrisK1970 · « **Reply #13 on:** January 30, 2015, 08:50 PM »

Quote from: elfick on January 30, 2015, 08:00 PM

Chris, I think the Mirka Systainer near the top is cheating since this is supposed to be Festool stacks.

Worse than that Elfick....my Mirka Systainer now houses a RYOBI Airstrike nailer!!!! For shame Christopher....for SHAME!!!!!

RobWoodCutter · « **Reply #14 on:** February 02, 2015, 09:57 AM »

I figured mines about 15.4' tall, if stacked on floor.

SittingElf · « **Reply #15 on:** February 02, 2015, 10:05 AM »

Quote from: RobWoodCutter on February 02, 2015, 09:57 AM

I figured mines about 15.4' tall, if stacked on floor.

I figured mine would be about 12".... if I folded it in half!

Frank

getyourbone · « **Reply #16 on:** February 02, 2015, 10:07 AM »

What is the safe working height limit for a stack of systainers? I haven't seen that in the specs.

wow · « **Reply #17 on:** February 02, 2015, 10:17 AM »

Quote from: getyourbone on February 02, 2015, 10:07 AM

What is the safe working height limit for a stack of systainers? I haven't seen that in the specs.

Depends on how tall and/or clumsy you are?

getyourbone · « **Reply #18 on:** February 02, 2015, 10:29 AM »

Thanks, My current ladder only goes to 16 feet but if I put it on top of my trailer I should be able to 23 feet. Only about 17 or 18 feet to go.

Mismarked · « **Reply #19 on:** February 02, 2015, 05:07 PM »

Quote from: SittingElf on February 02, 2015, 10:05 AM

Quote from: RobWoodCutter on February 02, 2015, 09:57 AM

I figured mine would be about 12".... if I folded it in half!

Frank
Hilarious

Ed Bray · « **Reply #20 on:** February 02, 2015, 05:25 PM »

Quote from: ChrisK1970 on January 30, 2015, 08:50 PM

Quote from: elfick on January 30, 2015, 08:00 PM
Chris, I think the Mirka Systainer near the top is cheating since this is supposed to be Festool stacks.
Worse than that Elfick....my Mirka Systainer now houses a RYOBI Airstrike nailer!!!! For shame Christopher....for SHAME!!!!!

I've got a lot of the Ryobi One+ stuff including 2x Airstrike Nailers (P320 & P325), they're brilliant.

Festool USA · « **Reply #21 on:** February 02, 2015, 06:11 PM »

Sam (PA Floor Guy) asked me to share his stack. So, here it is. He says he's added 4 more since this photo was taken. Nice.

copcarcollector · « **Reply #22 on:** February 02, 2015, 06:34 PM »

Shane - How about a picture of the ultimate stack, well in N America I guess - the Indiana warehouse..?!

Festool USA · « **Reply #23 on:** February 02, 2015, 06:57 PM »

Quote from: copcarcollector on February 02, 2015, 06:34 PM

Shane - How about a picture of the ultimate stack, well in N America I guess - the Indiana warehouse..?!

I can't post a photo of the warehouse, but I can share the Wall o' Systainers from the training center in Indy.

Throwback7r · « **Reply #24 on:** February 02, 2015, 08:43 PM »

Been there! That stack is larger than the photo makes it seem.

getyourbone · « **Reply #25 on:** February 02, 2015, 09:17 PM »

Have they ever stacked 'em in one stack? Like to see that ladder!

...Introducing the new Festool Scissor Lift system...

Festool USA · « **Reply #26 on:** February 02, 2015, 09:20 PM »

Check out #StackFest on Twitter.

https://twitter.com/search?q=%23StackFest&src=typd

Particularly, this one:

Joseph C · « **Reply #27 on:** February 02, 2015, 09:34 PM »

I'm excited/afraid to stage my own!

getyourbone · « **Reply #28 on:** February 02, 2015, 09:48 PM »

Wow!

They really didn't make it that tall until recently. Looks like until just a few years ago they only achieved about 7 feet...And then things really took off!

ChrisK1970 · « **Reply #29 on:** February 02, 2015, 09:56 PM »

I just bought two Cooltainers from Uncle Bob as the price was down. I wasn't going to buy them but hey....they're cool. I will use the as tool storage but plus two Sys4's for my pile. I'm also picking up the OF1010 in the next week or two for my shop....so + another

Not to bad for an amateur woodworker.