Anyone NOT use Systainers in the shop?

[mikey2]

Just ordered my first batch of Festool, TS55, CT22, RO125, Domino, and was wondering if anyone else does not plan to use the Systainers in their shop.  My work area is small, without a lot of room to sit cases on while getting the tool out.

I seldom have to transport my tools, so they reside in drawers and cupboards.  I do not even keep track of which wrench, etc. came with any particular tool, those go in drawers also.  Owners manuals and paperwork go in a file drawer.

The CT22 will sit on a shelf under one end of my bench, and will seldom be moved around.

It is actually easier for me to get a tool out of a drawer without having to have space to sit a case on, open it, then set the tool somewhere while closing and stowing the case.  I seem to have no problem getting the proper allen wrench, collet wrench, or whatever out of the drawer without unduly fishing around.

The Systainers will likely sit in the back room gathering dust until I either get a bigger shop, or decide to get rid of them.

 

[Mirko]

In the shop my systainers are empty, but they sit on a shelf next to the tool that goes in it. I keep the accessories in the systainer, this keeps them from "walking". When the time comes to go on site, its easy to put it in the box and go.
For me there is no reason to put the tools in/out of the systainer all day.... waste of time.
I bought a sysport but its really only used on site to lock the tools up at the end of the day.

Mirko

 

[WarnerConstCo.]

I like empty systainers.

 

[Brice Burrell]

Mikey, welcome to the FOG! You could sell the Systainers for a little extra holiday cash. If you price them reasonably they'll sell quickly. Check out the classified section of the forum.

 

[imaginarynumber]

Being a lazy git I use the systainers as steps. The lids eventually start to crack and the hinge pins pop out.

They used to advertise them as such but I dont think that they endorse the use of systainers as ladders any more.  

 

[Inner10]

If your purly a shop rat then you will never realize the full awesomeness of the systainer's transportability.

Whatever means of organization works best for you in your space is right.

That being said I like empty systainers more then Warner....if you catch my drift. [big grin]

I also hurt popped a systainer appart by lowering my 200 pound foot upon them.  Didn't crack but I then realized its best not to stand on the big ones 3/4/5's unless they are full of goodies to take the weight.  The systainers with the coloured boxes can handle serious weight!  Sortainers and sys1s can also handle alot of weight.

 

[Neill]

Mikey,

As Brice said... [welcome].

I like to keep my tools in the systainer because it helps to keep the dust and whatever else is in the air or spills from getting on them.  Also, I keep my Festools stacked on a shelving unit.  I would not be able to stack them otherwise.

Neill

 

[Holzhacker]

Recently used Systainers under the low side ladder leg on a set of stairs while installing a skylight. Worked great, I'm still here. Thought about posting a pic but didn't want to promote bad habits. ;D Tools mostly stay in the Sys though.

 

[score0matic]

Welcome to the forum,

As for me I hate systainers,  Wish i had never even been given the opportunity to use them I strongly urge you to save your self and get rid of them before they ROT your mind and convince you that they are the solution for all your storage and organizational needs.  As a man who is moved from sick [embarassed] to possessed [blink] you could sent them to me with out much concern that they will make ME any more deranged and only slightly more organized.

Craig

 

[harry_]

I generally use mine. I built a sysport of sorts over the summer so that each tool could have it's own home when not in the truck. I found that my sander box in particular and surely by a design flaw on my part (read: unplanned feature), I am able to put the tool in it's systainer and push the drawer back into it's cabinet with the cord still hanging out. At least I am not constantly and completely packing & unpacking it

With the slightest pull on the cord (GASP) the drawer will pull out (on roller glides). Since I generally have to fondle the cord so I can plug it into my CT33, it's not big of a deal. I simply do not have the space to have power tools laying 'at the ready'. I have found from past experience that is how my tools end up on the floor.

With that said,..
I have a MFT/3 in route via UPS as I type, so everything about my shop is subject to change.

 

[Jesse Cloud]

I generally use mine. I built a sysport of sorts over the summer so that each tool could have it's own home when not in the truck. I found that my sander box in particular and surely by a design flaw on my part (read: unplanned feature), I am able to put the tool in it's systainer and push the drawer back into it's cabinet with the cord still hanging out. At least I am not constantly and completely packing & unpacking it

With the slightest pull on the cord (GASP) the drawer will pull out (on roller glides). Since I generally have to fondle the cord so I can plug it into my CT33, it's not big of a deal. I simply do not have the space to have power tools laying 'at the ready'. I have found from past experience that is how my tools end up on the floor.

With that said,..
I have a MFT/3 in route via UPS as I type, so everything about my shop is subject to change.

So. an MFT3 is on the way ... where are you going to store the miscellaneous clamps, nuts and bolts for the extrusions, toolie tool, ....better get another systainer

 

[gckc117]

Hi guys,  I read this board frequently but don't feel compelled to write often.  Great site though. 

I have systainers from the ro150, ts55, and c12, all sitting in furthest recess of shop storage.  I actually really like the system but can't integrate in my work really.  I use the saw and sander in the shop almost exclusively, and usually just take a big bag on site for installs.  One good thing about that drill is that although I love the thing, I have no qualms about tossing it around a little bit.  Pretty rugged and definitely paid for itself already.

Mikey, welcome to the FOG! You could sell the Systainers for a little extra holiday cash. If you price them reasonably they'll sell quickly. Check out the classified section of the forum.

So I have those three, and will definitely be accumulating some more.  What do you guys think is a reasonable price for those?  sys1, sys3 and sys4.  And anyone interested?  I live in Brooklyn, NY.  I'd post in classifieds but I'm just curious for now.

Graham

 

[Brice Burrell]

......So I have those three, and will definitely be accumulating some more.  What do you guys think is a reasonable price for those?  sys1, sys3 and sys4.  And anyone interested?  I live in Brooklyn, NY.  I'd post in classifieds but I'm just curious for now.

Graham

Graham, take look at the classified section to find what other have sold them for. If I were you I'd think about keeping the tool inserts since they have little or no resale value. That way you'll have the inserts if you decide to go back to using Systainers in the future.

 

[AlexThePalex]

If I were you I'd think about keeping the tool inserts since they have little or no resale value.

I bought a stack of 4 used systainers half a year ago for 85 euros. That was extremely cheap. It became even cheaper when I sold off the 3 inserts in it for 28 euro together. Over here, they do have value.

 

[danrush]

While I'm a huge fan of systainers on the jobsite, I find them just a bit cumbersome in the shop.  I much prefer to have tools on an open shelf, ready to rock and roll.  For me, quick accessability and not having to see, open, and then close a box each time a tool is used, is a great time savings.  It's easier for my work methods to stage a tool where it's mostly used.

Dan

 

[WarnerConstCo.]

While I'm a huge fan of systainers on the jobsite, I find them just a bit cumbersome in the shop.  I much prefer to have tools on an open shelf, ready to rock and roll.  For me, quick accessability and not having to see, open, and then close a box each time a tool is used, is a great time savings.  It's easier for my work methods to stage a tool where it's mostly used.

Dan

I agree that systainers are not the best in a shop evironment (unless you are a baller and have a half dozen syports [cool])

But, for being mobile the majority of the time, I find them very usefull.  I know you do to!! [big grin]

 

[Mirko]

While I'm a huge fan of systainers on the jobsite, I find them just a bit cumbersome in the shop.  I much prefer to have tools on an open shelf, ready to rock and roll.  For me, quick accessability and not having to see, open, and then close a box each time a tool is used, is a great time savings.  It's easier for my work methods to stage a tool where it's mostly used.

Dan

I agree that systainers are not the best in a shop evironment (unless you are a baller and have a half dozen syports [cool])

But, for being mobile the majority of the time, I find them very usefull.  I know you do to!! [big grin]

How many "Ballers" on here?... What  I mean is... Throw your hands in the air, if youse a true player, and own more than one of these badboys?

Mirko

 

[WarnerConstCo.]

I just can't spend the money for one yet, because I would need at least 2. [mad]

 

[JeromeM]

They make OK tables during woek. [big grin]

and after work to [eek]