SittingElf
Member
- Joined
- May 28, 2013
- Messages
- 1,371
Jobsworth recently posted a couple of his projects, and one of them was a breadbox and towel dispenser. I loved the idea, and my wife was using a horrible, cheap breadbox, so I built one similar to Jobsworth's.
This was an opportunity to use the Festool "System", and I used a lot of tools I have purchased over the last two years for the first time. Learning curve, but success in the end thanks to YouTube videos from Rick, Paul-Marcel, Peter, and others.
Top shelf is Baltic Birch, and the rest is all from one board of quality pine. Stained with Watco Black Walnut Danish Oil. Once completely dry and cured, I'll probably do something to give it some gloss... poly or wax. Shelves are Domino'd.
[attachimg=1]
Festools used:
Kapex
OF 1010
OF 1400
PSC 420
TS55 on MFT/3 Rail
CXS
PDC w/ ZOBO Forstner Bit
RO90 and Granat
DF 500 Domino 5mm and 6mm
Festool MFT clamps
CT Mini
No non-Festool power tools used! [wink]
Cheers,
Frank
This was an opportunity to use the Festool "System", and I used a lot of tools I have purchased over the last two years for the first time. Learning curve, but success in the end thanks to YouTube videos from Rick, Paul-Marcel, Peter, and others.
Top shelf is Baltic Birch, and the rest is all from one board of quality pine. Stained with Watco Black Walnut Danish Oil. Once completely dry and cured, I'll probably do something to give it some gloss... poly or wax. Shelves are Domino'd.
[attachimg=1]
Festools used:
Kapex
OF 1010
OF 1400
PSC 420
TS55 on MFT/3 Rail
CXS
PDC w/ ZOBO Forstner Bit
RO90 and Granat
DF 500 Domino 5mm and 6mm
Festool MFT clamps
CT Mini
No non-Festool power tools used! [wink]
Cheers,
Frank
