Check my parts list for Blum hardware?

[DynaGlide]

Getting ready to order some stuff to do a mock up cabinet before I start ordering the nicer materials to do several more boxes/drawers/doors etc. First time in this territory so want to get a check from someone who does this on the regular that I won't be placing another order.

Plan is as follows: 24" base cabs, frameless, overlay doors and drawers line bored with LR32 system to accept 21" Tandem plus slides and 110 degree hinges. There will be some upper cabs, same style with doors.

Here's what I've come up with in terms of parts:

 

[tjbnwi]

The slide number is 563H5330B.

If you have any shared panels you’ll need the 71B3650 hinges and the Blum sex bolts to mount them.

The rest of the numbers are correct. 

Tom

 

[DynaGlide]

The slide number is 563H5330B.

If you have any shared panels you’ll need the 71B3650 hinges and the Blum sex bolts to mount them.

The rest of the numbers are correct. 

Tom

Thanks Tom. Helpful as usual.

 

[danrush]

One more thought: the 563h slides are for drawer boxes with 5/8" sides. 563f are for 3/4" sides.  I was recently jammed up by a supplier when they they sent a mix of the slides for a retro fit.

 

[todd_fuller]

A comment about the drawer locking devices, those highly adjustable ones are pretty wide so if you have narrow drawers, be aware of that.

Also, do you have the Blum drilling template? I think it's like $20 but for all the little holes, it can be a decent time saver.