CMS GE Infeed Table?

[Ironmantrev]

Just picked up my new CMS GE table yesterday and have it assembled. Got to looking at the Outfeed extension wondering if it could be used for an Infeed extension. The switch currently is in the way for an Infeed, this would have to be moved, or possibly loosened off so the small bracket could fit between the frame and the body of the switch. Has anybody done this?

Also got four little metal brackets, but don't know exactly what they are for. Part # is 499320. The separate zip lock bag they came in has a label that says Winkel CS 50 / CMS. Can someone tell me what they are for?

Thanks in advance.

 

[copcarcollector]

Yes it has been done, you need to purchase another outfeed table and use it on the infeed side. (Or just use the one you have on the other side!)
492092  Currently $259 in the USA

Here is a topic where this is covered, and pics as well:
http://festoolownersgroup.com/festool-wish-list/vectura-first-pass/msg363981/#msg363981

 

[Ironmantrev]

Awesome copcarcollector! Thank you very much for the link. Got some reading to do.

Clearly the OP in that thread does not have enough clamps, haha. Wowsers. Pretty impressive shop. Something to strive for most certainly.

 

[Gary Sosa]

Did you ever figure out the 499320 brackets that came with the CMS? I came across them too...

 

[Sparktrician]

Just picked up my new CMS GE table yesterday and have it assembled. Got to looking at the Outfeed extension wondering if it could be used for an Infeed extension. The switch currently is in the way for an Infeed, this would have to be moved, or possibly loosened off so the small bracket could fit between the frame and the body of the switch. Has anybody done this?

Also got four little metal brackets, but don't know exactly what they are for. Part # is 499320. The separate zip lock bag they came in has a label that says Winkel CS 50 / CMS. Can someone tell me what they are for?

Thanks in advance.

I use two infeed/outfeed tables as you'd like to do and had to relocate the power switch to a position above the tables and to the rear.  It was an easy thing to do.  PM me with your email address if you'd like some pictures. 

 

[PreferrablyWood]

I'd try a UG wing for infeed

 

[ADKMedic]

So I came across this thread in a Google search...

Does anyone know what the Winkel CS 50 / CMS part #499320 is for??? 

Thank you in advance.

Andy

 

[GarryMartin]

There's an image in the linked thread. I'm sure [member=8433]RobWoodCutter[/member] won't mind me reposting it.

[attachimg=1]

 

[Cheese]

So I came across this thread in a Google search...

Does anyone know what the Winkel CS 50 / CMS part #499320 is for??? 

If you use the CMS GE in a leg-folded position, those brackets are used to secure the CMS to a table/platform. There's a small area on each leg where they will fit.

I threw 4 each #9 x 1 1/4" Spax screws in the "Winkel Bag" just so I have everything at hand if I need them.  [smile]

 

[ADKMedic]

[member=11629]GarryMartin[/member] and [member=44099]Cheese[/member] - thank you very much!  Wondering what those parts were was starting to drive me crazy!

Andy