Thanks to all who replied. I like the OF1010 fitting.
I ended up taking out the long dividers and then removing the small dividers with the whole set outside of the drawer. As noted in the above reply, the small dividers are difficult to detach from the large dividers. It is much simpler when outside the drawer as it is possible to flex and pull and curse then try again.
Below are three pictures showing my first attempt, second attempt and the second attempt with the drawer in the Combi-Systainer.
The tops of the little boxes have a tight tolerance for fitting inside the Systainer. I almost jammed the whole thing when one domino protruded just a wee bit over the top of the box.
The black things at the back are foam spacers which allow better access to any boxes in the back of the drawer. The red items are Woodpecker Domino depth spaces. One of the micro Systainers contains the Domino bits and the other screws for the Domiplate. The knob is for the Domiplate also. The black thing with yellow tag is a 27 to 36 Fein vacuum hose adaptor. The other bits are Domino accessories.
Someday I will cut a foam insert to better contain some on the items.
I ended up taking out the long dividers and then removing the small dividers with the whole set outside of the drawer. As noted in the above reply, the small dividers are difficult to detach from the large dividers. It is much simpler when outside the drawer as it is possible to flex and pull and curse then try again.
Below are three pictures showing my first attempt, second attempt and the second attempt with the drawer in the Combi-Systainer.
The tops of the little boxes have a tight tolerance for fitting inside the Systainer. I almost jammed the whole thing when one domino protruded just a wee bit over the top of the box.
The black things at the back are foam spacers which allow better access to any boxes in the back of the drawer. The red items are Woodpecker Domino depth spaces. One of the micro Systainers contains the Domino bits and the other screws for the Domiplate. The knob is for the Domiplate also. The black thing with yellow tag is a 27 to 36 Fein vacuum hose adaptor. The other bits are Domino accessories.
Someday I will cut a foam insert to better contain some on the items.
