WOWsFamily
Member
- Joined
- May 7, 2015
- Messages
- 16
Hey everyone,
This is WOWs daughter - we are starting to clean out his shop, and I have a list of some materials and BIG woodworking tools of his that I know I won't use. I know what they are, and I know how to use them, but I am a carpenter, not a cabinet makers, and there is definitely a difference!
These are commercial tools, most require 240V, and their own trailer to be loaded. They are in the general area of Minneapolis, MN....I honestly don't believe shipping most of these is an option.
I have a forklift onsite to load. If you are interested in the tools, we can work out details via e-mail (mine is prettytruck37@gmail.com. Here's the list of what I know I will be moving out:
80+ sheets of Environ (basically colored, environmentally friendly MDF) used to retail for $40+ a sheet - make an offer (You need a trailer capable of hauling 12,000 lbs and a DIESEL truck to move the whole pile - it will probably blow the transmission on a gas truck, stuff is HEAVY)
Oak/Birch Veneer cabinet skins. 24"x24" and approx 1/8" thick, at least 50 of them, looking for $5 each
160+ board feet of Macassar ebony, including several planks (80"x8"x1.75") $50/bd ft if purchased individually, or $40/bd ft for entire pile ($6400 for full amount)
Seco, 5 HP, 220V dust collector, retails for $1100, asking $800, including ALL hoses
Vega EBS6-1 Edge Belt Sander (6x132), original retail $1600, asking $1000 and including any sandpaper we find for it
Vega 1553S Lathe with D-48 Vega Duplicator, original retail including both $3000, asking $2200 for both
Delta 50-870 3-speed ambient air cleaner with remote and added shroud for additional filters (quantity 2), retail $500 each. Will sell both for $700/additional filters negotiable.
Robland Mortiser, $500 original retail, asking $300
Sale Pending - Robland XS-31 Jointer/Planer, original retail $1000, asking $500
Laguna Tools LT-18 Bandsaw, original retail $4000, asking $3000 including any extra blades we find
Northfield Unipoint Radial Arm Saw, X36AF...built in 1968 with Hydraulic Crossfeed - this is MASSIVE. (It's the size of a VW Bug) Takes a 16" blade. Since it is the older version, even though it works, the parts for the crossfeed are no longer available. If the crossfeed breaks, it can be removed and the saw can be manually pulled. Price on one of these suckers new today is right around $21,000. I'm asking $3000.
With the exception of the Jointer/Planer, all of these items have seen minimal use.
FYI, I am listing these things on multiple sale sites, so if you have a significant interest in a certain tool, let me know immediately.
This is going to be a long process, because I want to make sure these tools go to good homes with people who will actually use them to make beautiful things. Consideration given to buyers who want multiple items.
All sales will be CASH ONLY
This is WOWs daughter - we are starting to clean out his shop, and I have a list of some materials and BIG woodworking tools of his that I know I won't use. I know what they are, and I know how to use them, but I am a carpenter, not a cabinet makers, and there is definitely a difference!
These are commercial tools, most require 240V, and their own trailer to be loaded. They are in the general area of Minneapolis, MN....I honestly don't believe shipping most of these is an option.
I have a forklift onsite to load. If you are interested in the tools, we can work out details via e-mail (mine is prettytruck37@gmail.com. Here's the list of what I know I will be moving out:
80+ sheets of Environ (basically colored, environmentally friendly MDF) used to retail for $40+ a sheet - make an offer (You need a trailer capable of hauling 12,000 lbs and a DIESEL truck to move the whole pile - it will probably blow the transmission on a gas truck, stuff is HEAVY)
Oak/Birch Veneer cabinet skins. 24"x24" and approx 1/8" thick, at least 50 of them, looking for $5 each
160+ board feet of Macassar ebony, including several planks (80"x8"x1.75") $50/bd ft if purchased individually, or $40/bd ft for entire pile ($6400 for full amount)
Seco, 5 HP, 220V dust collector, retails for $1100, asking $800, including ALL hoses
Vega EBS6-1 Edge Belt Sander (6x132), original retail $1600, asking $1000 and including any sandpaper we find for it
Vega 1553S Lathe with D-48 Vega Duplicator, original retail including both $3000, asking $2200 for both
Delta 50-870 3-speed ambient air cleaner with remote and added shroud for additional filters (quantity 2), retail $500 each. Will sell both for $700/additional filters negotiable.
Robland Mortiser, $500 original retail, asking $300
Sale Pending - Robland XS-31 Jointer/Planer, original retail $1000, asking $500
Laguna Tools LT-18 Bandsaw, original retail $4000, asking $3000 including any extra blades we find
Northfield Unipoint Radial Arm Saw, X36AF...built in 1968 with Hydraulic Crossfeed - this is MASSIVE. (It's the size of a VW Bug) Takes a 16" blade. Since it is the older version, even though it works, the parts for the crossfeed are no longer available. If the crossfeed breaks, it can be removed and the saw can be manually pulled. Price on one of these suckers new today is right around $21,000. I'm asking $3000.
With the exception of the Jointer/Planer, all of these items have seen minimal use.
FYI, I am listing these things on multiple sale sites, so if you have a significant interest in a certain tool, let me know immediately.
This is going to be a long process, because I want to make sure these tools go to good homes with people who will actually use them to make beautiful things. Consideration given to buyers who want multiple items.
All sales will be CASH ONLY
