Dust collection Bosch 4100 TS

[hamsey]

Searching on the internet I am finding a lot of information about sealing the Bosch 4100 contractors table saw. What I am not finding is what people are using for the actual dust collection. After doing some reading here it appears that my Festool dust extractors will not be a good fit.

Anyone have a recommendation on a portable setup to use? I was thinking about a dust deputy attached to something I just don't know what. Shop vac, portable dust extractor Other???

Thanks!

 

[ChuckM]

If you can use a dust deputy, use it. It's the next best thing to a shop vac (or a dust extractor). But before you get a dust deputy (which I have), consider this option:

 

[ladilday]

my first setup with my 4100 was with a Rockler Dust Rite 650CFM DC which was not enough even though it was within 6 ft. I see that Rockler now has a Dust Rite 1250.  I also added a piece of sheet metal on the bottom side of the 4100 w/ a 4" fitting to connect to my DC as well as a 2.5" to the back side of the 4100