Festool CMS VB-CMS question about part number

[BCConstruction]

Hey guys. have a question. I like to use my UG wings as outfeeds on my CMS. This is simple without the VL outfeed connected but with the outfeed connected needs a little work. what im asking is what is the parts numbers for the rail that is connected to the back side of the VB-CMS. I have used this part from mine to use it on the VL outfeed and I want a replacement for the VB-CMS. hopefully the pictures show the parts I need. I need part number for the dark plastic corner pieces and the part number for the rail profile I used from the VB.

im not exactly sure why festool didn't do this them self but its a pretty simple mod.

Is there any reason my pics ain't showing? The direct links work but not when done as an img

https://www.dropbox.com/s/7t4qih3kt66jmpp/Photo%20Jun%2009%2C%2012%2011%2043%20PM.jpg
https://www.dropbox.com/s/i8x7ffzihzow2k7/Photo%20Jun%2009%2C%2012%2011%2058%20PM.jpg
https://www.dropbox.com/s/d87hzor46iyrclr/Photo%20Jun%2009%2C%203%2036%2022%20PM.jpg
https://www.dropbox.com/s/ux0rkfpnxye80r0/Photo%20Jun%2009%2C%203%2036%2046%20PM.jpg
https://www.dropbox.com/s/r0j16l3g7pu5kga/Photo%20Jun%2009%2C%203%2036%2026%20PM.jpg

I have found the parts required
464783 x1
463816 x2
473192 x1

I will post an update when they turn up and I mod them.

 

[nclemmons]

Did you check the EKAT system?

ekat.festool.com

neil

 

[Rocky]

You can access EKAT from the Festool Websites tab at the top.

 

[BCConstruction]

Thanks guys I found the numbers on the exploded parts list in the manual.

That EKAT system didn't have the parts on there from what I could find.

 

[AlexThePalex]

Thanks guys I found the numbers on the exploded parts list in the manual.

That EKAT system didn't have the parts on there from what I could find.

The VB-CMS table widener isn't sold in the USA and therefore not in the USA Ekat. It is always wise to check the German or Dutch Ekat if you want to know it all.  

Is there any reason my pics ain't showing? The direct links work but not when done as an img

I think your links don't work because they don't link to the pic directly, but to the dropbox page with the pic on it.

You have to get the URL of the pic itself. In Firefox I choose "View Image" from the context menu and then "Copy Image location". Other browsers have their own way to do this.