Festool Table extention

[msw]

Is the Festool table extension for MFT 1080 will work with the MFT/3

Thank you for your feedback

Meezo

 

[Bob Marino]

The Extension Table was designed for the MFT 1080 and 800, but it can easily be modified to  be used with the MFT/3's.
All that needs be done is modify  the height by about 3/4" to be at the same level as the MFT/3. There was a recent post with a simple and inexpensive such fix.

Bob

 

[illumicon1]

Its actually 1/2" thats needed to lift the table to meet the surface of the MFT/3. I just did it and it works great. All that's needed is a piece of 1/2" scrap and 4 new 1" metric machine bolts.

 

[Bob Marino]

Its actually 1/2" thats needed to lift the table to meet the surface of the MFT/3. I just did it and it works great. All that's needed is a piece of 1/2" scrap and 4 new 1" metric machine bolts.

  Correct, good catch!

Bob