Lou in DE
Member
- Joined
- Apr 1, 2015
- Messages
- 100
I have had the Kapex for about 6 months but have never needed to make a bevel cut until today. I was making a box out of 3/4 inch cabinet grade plywood with mitered corners. The board width was about 5 inches. I was holding the board with my left hand and trimming off just enough to get the 45 degree miter - the blade was tilted left. The cut was perfect but the small cut off took off like a bullet across the shop about 20 ft until it hit the opposite wall - fortunately missing my head by a few inches or so. I think that I had set up correctly. Anyone have a suggestion - I'm a little wary to try a second bevel cut [scared]