fs accessory systainer, 2 codes

[Trans former]

Hi all,

Im looking at the FS-SYS/2 accessories Systainer but there seams to be 2 available with different codes and prices, although they seem to both have the same contents....

Can anybody shed some light on this for me, Im ready to click the buy button but dont want to get the wrong one for the sake of £20..

codes are. 492396  or 497657

Thanks [wink]

 

[neeleman]

The differences are old and new codes.
492396 is "old one" in Classic systainer
497657 is new one in T-Loc systainer.
The contents are the same.

 

[Trans former]

Thanks neeleman,

Looks like I'll be spending the extra £20 then..

 

[jonny round boy]

Thanks neeleman,

Looks like I'll be spending the extra £20 then..

You might also consider saving a bit more by not buying it. The clamps, rail joiners etc are worth having, but the general consensus is that the angle thingy is junk. The hose guide for the end of the rail can be useful, but it depends entirely on how you use the saw. I bought one several years ago, and I can count on one hand the number of times I've used it.

If you don't have the angle thingy, pretty much everything else from that set will fit in the saw systainer, so you don't even need the sys1.

Must admit though I've not calculated the pricing difference between buying the set, and buying everything else bar the angle thingy separately...

 

[AlexThePalex]

Must admit though I've not calculated the pricing difference between buying the set, and buying everything else bar the angle thingy separately...

It's almost the same, about 140 pounds. Cheapest way seems to me to buy the set, and if the angle thingy isn't satisfactory, sell it.

 

[Trans former]

I held off on that one, as you say probably won't use the angle thingy that much so ive put the money towards my LR32 set.. oooh see how that goes, no more sticks with holes.

So thanks for advice. [smile]