rmwarren
Member
- Joined
- Jul 11, 2010
- Messages
- 3,063
I finally brought myself to drill & tap holes in my pretty red Woodpecker's square, now it attaches in seconds to the guide rail via the clips from the Rip Dogs.
[attachthumb=#]
[attachthumb=#]
[attachthumb=#]
[attachthumb=#]
Just loosen the thumb screw to slid the clip on/off the shoulder bolts & WA-LA, instant cross-cut guide.
Ignore the second tapped hole, I goofed and used the wrong tap so I now have 5/16" and M8 holes in the square. [sad]
RMW
[attachthumb=#]
[attachthumb=#]
[attachthumb=#]
[attachthumb=#]
Just loosen the thumb screw to slid the clip on/off the shoulder bolts & WA-LA, instant cross-cut guide.
Ignore the second tapped hole, I goofed and used the wrong tap so I now have 5/16" and M8 holes in the square. [sad]
RMW