I had to try this..

[Nick C]

A great idea! I never have liked miter clamps.

 

[Guilliaume woodworks]

Dave,

Pretty cool idea buddy.  

If I had a butt load of miters to do heres a nice clamp Ive been meaning to get to try.

http://www.garymkatz.com/toolreviews/clam_clamps.html

Steve (Fatroman) had a set of these and loved them.

I can using these clamp along with dominos to make some awesome miter joints

They aient exactly cheap but their small light weight and easy to use on site

Here is a article by Jim Chestnut on building Radius cabinets. Though not festool, I thought this is a awesome and easy photo description of what I would think is a very difficult tedious cabinet build complete with how to make the forms.

http://www.miterclamp.com/radius/pages/Radiuscabinetphotoessay.htm

those clam clamps are awesome...if you get some let me know what you think..

 

[upscale]

Does the Domino in any way suffer from the same issues a biscuit joiner where the piece don't always register perfectly? I think this is my biggest hangup with biscuits.

Exactly the opposite. The Domino (if used properly), registers exactly as it's supposed to and does it very easily. That in fact, is its speciality ~ fast and easy. But, the word of Domino owners like myself is just our opinion so I'd suggest you get your butt over to a dealer holding a Festool day and see for yourself.

 

[sancho57]

Dave,

Pretty cool idea buddy.  

If I had a butt load of miters to do heres a nice clamp Ive been meaning to get to try.

http://www.garymkatz.com/toolreviews/clam_clamps.html

Steve (Fatroman) had a set of these and loved them.

I can using these clamp along with dominos to make some awesome miter joints

They aient exactly cheap but their small light weight and easy to use on site

Here is a article by Jim Chestnut on building Radius cabinets. Though not festool, I thought this is a awesome and easy photo description of what I would think is a very difficult tedious cabinet build complete with how to make the forms.

http://www.miterclamp.com/radius/pages/Radiuscabinetphotoessay.htm

those clam clamps are awesome...if you get some let me know what you think..

Roger that I will

 

[ericbuggeln]

Guilliaume, what was the width on the frame parts? I have about twenty frames to do soon and am gonna try that at least on some of the bigger ones. Seems like the Kreg Klamping Table would excel at fitting those joints. I'm gonna do some tests tomorrow to see how narrow you can make them before the second domino interferes with the rabbet. Depending on those results I might get this for some of the smaller frames. Let me know if anyone has experience with it, Eric

http://www.bonsaigroup.gg/media/10900/Mayfield_OakSpunboard_DoorwayDetail_6