Kapex Extensions

[teardrop63]

I am looking at buying the Kapex extension arms to attach to my Kapex when it is sitting on my MFT (not the Kapex MFT).
Can anyone confirm whether the legs will be the right height or will they be too short?
From what I can see, with the height of the MFT at 900mm and the extra height of the Kapex of 110m, this overall height may be too high.

 

[Administrator_JSVN]

If you're talking about the extensions that attach to the crown stops, yes it will be at the right height.

 

[teardrop63]

Just so I understand this correctly, the UG KA set consisting of the trolley and the extension arms (that attach to the Kapex itself) sit at a working height of 900mm.
That suggests that the Kapex base sits lower than 900mm (790mm as it would on the Kapex MFT) so that the overall height of 790mm plus 110mm brings it up to the 900mm.
Whereas if I sit the Kapex on my standard MFT the working height becomes 1010mm.
Therefore in this scenario I am guessing that the arms will be too short.

 

[Administrator_JSVN]

Sorry. I mis-read your post. You would need the MFT made for the Kapex, which is shorter.

Listed on our website as the MFT Mini.

http://festoolusa.com/power-tools/work-tables/