Kapex KS120 Detailed Dimensions

[Tony Costello]

Can someone point me to a detail drawing that has the following dimensions on it (shown in red) A-B-C-D-E-F? Or can someone measure theirs for me - I'm trying to find out if it will fit the miter saw cabinet I already have - thanks!

 

[Tony Costello]

Can anyone help w/ these dims?  Thanks.

 

[Administrator_JSVN]

Tony, sorry I meant to get these for you earlier in the week and got sidetracked. Let me see if I can get to the shop and get them all shortly.

 

[Administrator_JSVN]

Here you go...

[attachimg=1]

 

[Tony Costello]

Thanks!  That's exactly what I needed.

 

[Administrator_JSVN]

Glad to help.

I also added this under the Specs tab on the Kapex page of our website for future reference.

 

[Tony Costello]

I'm glad I asked for detailed dimensions, because the Festool page on the Kapex (http://www.festoolusa.com/power-tools/miter-saws/kapex-ks-120-sliding-compound-miter-saw-561287) lists the overall dimensions as 28" x 19 3/4" (W x D). But, the actual footprint dimensions are 24-3/16" x 26-3/4" (W x D). I'm not sure what the 28"x20" is suppose to represent because they don't fit the real unit in any way, unless they are they shipping box? Maybe that's it, but the webpage doesn't specify it that way. Anyway, thanks to Shane Holland for getting me the dimensions, they have indeed been very useful!

 

[Administrator_JSVN]

Tony,

I think those dimensions, 28x20", are when it's in its most compact position with the saw turned fully to one side of the miter setting. Sorry if it created any confusion. Like I said, I included the dimensions you requested on the website for future reference. Thanks for asking for that.

Shane

 

[keithchalfant]

Are these dimensions still accurate for the most recent 120?

 

[Wheres_my_pencil]

Are these dimensions still accurate for the most recent 120?

I’ve just had a KS120 delivered today and the height of the table doesn’t seem to be the same as a SYS 1. It seems very slightly lower. I’ll get the callipers on it tomorrow and report back. I also haven’t noticed the rubber feet mentioned by others. Will have a closer look!

 

[squall_line]

Are these dimensions still accurate for the most recent 120?

I’ve just had a KS120 delivered today and the height of the table doesn’t seem to be the same as a SYS 1. It seems very slightly lower. I’ll get the callipers on it tomorrow and report back. I also haven’t noticed the rubber feet mentioned by others. Will have a closer look!

Based on the dimensions in the drawing above, the height is 110mm, a Sys1 is technically 112mm, so that would make the Kapex deck 2 mm lower.