Looking Kapex 120 small side tables/fence

[Heino]

Hello

i have been looking around for a small side table/fence for my apex with moveable stops to do repeat cuts. In my show is just stand on a normal working table, so the ons festool have with a leg to the floors are to big and i dont need the leg....

have any of you some ides...

 

[RKA]

It looks like you will need to make your own.  Multiblades.com sells adapters that will connect a diy extension to the kapex.  Both kreg and Incra sell movable stops/fences that can be added to your extension set up.

 

[Trans former]

I have my Kapex with the side wings sat on my regular bench, the leg folds up underneath. there is even a hole so you can put a screw down into your bench.
its nice having the stops set up bang on, you dont even need to get your tape measure out.

 

[Heino]

what model do you have and do the height match on the leg and saw then they are on the same height/table

 

[GarryMartin]

what model do you have and do the height match on the leg and saw then they are on the same height/table

If you take a look at http://festoolownersgroup.com/festool-tools-accessories/finally-mounted-my-kapex/ you can see the Festool KA-UG arms attached directly to the bench; you simply remove the legs and they can be screwed/bolted down at the same height as the saw bed.

 

[Trans former]

I have the whole UG-KA set but I only put the saw on the trolley to take on site as I dont have the room in the work shop.

 

[Heino]

thank you.. seams that is the way to go...

 

[rizzoa13]

Transformer-

When you fold up the ug wings is the height the same as the deck on the kapex or did you need to shim it up somehow? From your picture it looks like you get a level surface just by folding up the legs. That would definitely be another plus towards buying the wings, thanks in advance!

 

[GarryMartin]

Transformer-

When you fold up the ug wings is the height the same as the deck on the kapex or did you need to shim it up somehow? From your picture it looks like you get a level surface just by folding up the legs. That would definitely be another plus towards buying the wings, thanks in advance!

They're designed exactly in that way; i.e. with legs folded or removed, the height of the KA-UG arms matches the bed of the KAPEX.