I bought a bunch of Festools (some from Bob Marino, some from a local dealer, some from Burns Tools) that I have not gotten around to using. My interests have shifted, and I'm selling them (with the exception of my CT33 vacuum, which I have used and can't part with).
All of these tools are brand new (100% unused) and have been sitting in their systainers inside my home. Exceptions: I did use the jigsaw exactly once to make a short cut in a wooden chair. I've used the MFT table, but haven't cut into it (it shows very light wear and is in near new condition).
I would like to find someone near me (I live in San Diego, CA) who would like to purchase many or all of these tools so we could avoid shipping charges. But I realize that may not be likely. If I sell them to someone I can't meet, we can go through PayPal. I am a Verified PayPal member (and have been since 2003). I also have two eBay accounts that are around that old, and both have 100% positive feedback on over 150 transactions. My point is that I have quite a bit of experience selling (and buying) over the internet. I know how to describe an item accurately and properly. (Since almost all of these items are brand new, descriptions aren't an issue. They have not been used or in anyway damaged.)
I think these ads are only viewable by FOG owners, so I probably don't need to say this, but I will just in case. I won't take any type of check or money order for these items. I won't deal with an intermediary because the buyer is nursing his sick aunt in Nigeria. In short, I have no intention of scamming anyone, and no intention of getting scammed.
What follows is a list of the items I have. (I may have one more guide rail than I'm listing. I'll have to check.) I've listed the current Festool prices for these items. I'm willing to go 20% off those prices (more on the MFT since it can only be sold locally and because I know it has been redesigned). I'll give a better discount for someone buying many or all of the items, and especially for someone who can pick them up. I want to have this post up for a day or two to see if a buyer within driving distance emerges. If such a buyer doesn't emerge, I'll end up selling the items and shipping them. If that happens, I'm willing to pay shipping to if I'm selling the items at 20% off. This will be somewhat dependent on how far the shipping is, and how big the item(s) is/are. I certainly won't be shipping the MFT table, and I'm not sure if shipping cost will make selling the 1900mm guide rail to expensive.
TS75 Circular Saw (w/FS1900 guide rail) $625
Saw blade Steel TS75, 36t (493351) $88
Saw blade Panther TS75, 16t (493196) $62.50
TRION PSB300EQ Jigsaw $310
Domino:
DF 500 Q Set - Domino w/Trim & Cross Stops (574283) $825
Cutter & Domino Tenon Assortment Systainer (493301) $260
Router:
OF1400 Router (574267) $470
Guide stop w/find adjuster, guide rail attachment for OF 1400 (492601) $70
Edge guide for OF1400 (492636) $64.50
Support, replacement, for OF1010 (438608) $3.50
Table widener OF1400 (493233) $120
Hole Drilling System:
FS1080/2-LR32 42? Hole Series (491621) $81.50
LR32 Hole Drilling Set w/SYS (583291) $425
Guide Rails:
Guide Rail, FS1080/2, length 42 (1080mm) $80.50
Vacuum Accessories:
Boom Arm Vac Overhead Attachment (492753) $250
Small Accessories:
Book: TS55& TS75 Portable Plunge Saws (Festool Essentials) $18
Book: The Domino DF 500 Joining System (Festool Essentials) $18
TOOLIE/1 with keys to fit all Festools (490833) $20
FS-SP3000 118? Splinterguard Replacement $19
SP-PS/PSB20 Splinterguard 20 pk (for Jigsaw) (490121) $15
FS-PS/PSB Guide Stop for Festool Jigsaw (490031) $16
MFT-SP Clamping Elements 2 pk (488030) $94
FSz300 11.8? Guide Rail Clamps 2 pk (489571) $44.50
Quick Clamp, FS-HZ 160 use with MFT and Guide Rails (491594) $38
Quick Clamp, FS-HZ 160 use with MFT and Guide Rails (491594) $38
Plug it detachable power cord for circular saws (490656) $35
Systainers/Sortainers and Accessories:
SYS3 Systainer (445596) $69.50
SYS1BOX Systainer w/Compartments (487552) $69.50
Systainer case size 1 SYS 1 OF, w/foam insert for up to 40 8mm/ 1/2 shank router bits (487925) $72.50
Sortainer, w/9 drawers, same size as SYS 3 (491985) $127
Foam insert set for Systainer (487427) $21
Foam insert diced for Systainer (FES487428) $15
Foam insert diced for Systainer (FES487428) $15
MFT 1080 Multifunction Table $425
If you have any questions, let me know.
Thanks,
Lee (in San Diego)
All of these tools are brand new (100% unused) and have been sitting in their systainers inside my home. Exceptions: I did use the jigsaw exactly once to make a short cut in a wooden chair. I've used the MFT table, but haven't cut into it (it shows very light wear and is in near new condition).
I would like to find someone near me (I live in San Diego, CA) who would like to purchase many or all of these tools so we could avoid shipping charges. But I realize that may not be likely. If I sell them to someone I can't meet, we can go through PayPal. I am a Verified PayPal member (and have been since 2003). I also have two eBay accounts that are around that old, and both have 100% positive feedback on over 150 transactions. My point is that I have quite a bit of experience selling (and buying) over the internet. I know how to describe an item accurately and properly. (Since almost all of these items are brand new, descriptions aren't an issue. They have not been used or in anyway damaged.)
I think these ads are only viewable by FOG owners, so I probably don't need to say this, but I will just in case. I won't take any type of check or money order for these items. I won't deal with an intermediary because the buyer is nursing his sick aunt in Nigeria. In short, I have no intention of scamming anyone, and no intention of getting scammed.
What follows is a list of the items I have. (I may have one more guide rail than I'm listing. I'll have to check.) I've listed the current Festool prices for these items. I'm willing to go 20% off those prices (more on the MFT since it can only be sold locally and because I know it has been redesigned). I'll give a better discount for someone buying many or all of the items, and especially for someone who can pick them up. I want to have this post up for a day or two to see if a buyer within driving distance emerges. If such a buyer doesn't emerge, I'll end up selling the items and shipping them. If that happens, I'm willing to pay shipping to if I'm selling the items at 20% off. This will be somewhat dependent on how far the shipping is, and how big the item(s) is/are. I certainly won't be shipping the MFT table, and I'm not sure if shipping cost will make selling the 1900mm guide rail to expensive.
TS75 Circular Saw (w/FS1900 guide rail) $625
Saw blade Steel TS75, 36t (493351) $88
Saw blade Panther TS75, 16t (493196) $62.50
TRION PSB300EQ Jigsaw $310
Domino:
DF 500 Q Set - Domino w/Trim & Cross Stops (574283) $825
Cutter & Domino Tenon Assortment Systainer (493301) $260
Router:
OF1400 Router (574267) $470
Guide stop w/find adjuster, guide rail attachment for OF 1400 (492601) $70
Edge guide for OF1400 (492636) $64.50
Support, replacement, for OF1010 (438608) $3.50
Table widener OF1400 (493233) $120
Hole Drilling System:
FS1080/2-LR32 42? Hole Series (491621) $81.50
LR32 Hole Drilling Set w/SYS (583291) $425
Guide Rails:
Guide Rail, FS1080/2, length 42 (1080mm) $80.50
Vacuum Accessories:
Boom Arm Vac Overhead Attachment (492753) $250
Small Accessories:
Book: TS55& TS75 Portable Plunge Saws (Festool Essentials) $18
Book: The Domino DF 500 Joining System (Festool Essentials) $18
TOOLIE/1 with keys to fit all Festools (490833) $20
FS-SP3000 118? Splinterguard Replacement $19
SP-PS/PSB20 Splinterguard 20 pk (for Jigsaw) (490121) $15
FS-PS/PSB Guide Stop for Festool Jigsaw (490031) $16
MFT-SP Clamping Elements 2 pk (488030) $94
FSz300 11.8? Guide Rail Clamps 2 pk (489571) $44.50
Quick Clamp, FS-HZ 160 use with MFT and Guide Rails (491594) $38
Quick Clamp, FS-HZ 160 use with MFT and Guide Rails (491594) $38
Plug it detachable power cord for circular saws (490656) $35
Systainers/Sortainers and Accessories:
SYS3 Systainer (445596) $69.50
SYS1BOX Systainer w/Compartments (487552) $69.50
Systainer case size 1 SYS 1 OF, w/foam insert for up to 40 8mm/ 1/2 shank router bits (487925) $72.50
Sortainer, w/9 drawers, same size as SYS 3 (491985) $127
Foam insert set for Systainer (487427) $21
Foam insert diced for Systainer (FES487428) $15
Foam insert diced for Systainer (FES487428) $15
MFT 1080 Multifunction Table $425
If you have any questions, let me know.
Thanks,
Lee (in San Diego)
