MFT/3 and Gladiator Garageworks accessories

[Slartibartfass]

Tried this yesterday. Looks ok from a load point. Not sure if this would hold if you bump into the table. Maybe best for temporary storage.

[attachimg=1]

[attachimg=2]

 

[bkharman]

Oh man Malte, that makes me nervous just looking at it!

You can do what I did. I think you have the Precision Plate, right?  If so mount it to a price of MDF on the wall with 20mm holes.

If you have open studs, reach back and put a knob on the back. If you don't have open studs, mount a board on a hinge with some backer strips to keep it all tidy and more importantly... Safe!

Let me know if you need pics, I can take them while my shop is clear.

Cheers. Bryan.