OF1010 - diy router table?

[kerf]

Hello,
I recently purchased the OF1010  [smile]
Whilst researching which router to buy I came across an article showing the 1010 in a homemade mini table!
I’m pretty sure it was on this forum. However, I’ve searched and can’t track it down!
Does anyone know if it exist here, or anywhere else for that matter??
Thanks, Dave (Kent, UK)

 

[xedos]

not exactly "mini" but it might give you ideas :
https://festoolownersgroup.com/index.php?pretty;board=festool-jigs-tool-enhancements;topic=replacement-cms-router-lift.0

 

[kerf]

Not exactly what I had in mind but worth a look!
Many thanks, Dave

 

[sancho57]

Here ya go
=PLFA044A8CA5175001&index=1

 

[kerf]

Hey thanks, very informative. The guy that made that had a lot of time on his hands, impressive!
The one I recall was a lot smaller, and easier to build..!! [smile]
Thanks for the link [smile]
Dave

 

[xedos]

The Benchworks guy from Belgium made something to fit in a systainer.

Is that what you're looking for ?

 

[kerf]

The table was more like the one in this ytube video, but OF1010 specific (fast forward to 4min)
Making box joints is the aim so will no doubt modify the video example to suit my router!
Thanks for the suggestions

 

[kerf]

Newbie problems... YouTube link did not display in above post  [eek]

 

[Bob D.]

What browser are you using.

 

[kerf]

Safari on iPad..!

 

[usernumber1]

embedded youtube link with no timestamp. yikes

i've fixed it for you
=239

 

[kerf]

Genius! Thanks
The problem was no-time stamp or safari?

 

[usernumber1]

Genius! Thanks
The problem was no-time stamp or safari?

safari - timestamp is kinda tricky without PC, you need to right click on a youtube video itself

 

[gunnyr]

Hello,
I recently purchased the OF1010  [smile]
Whilst researching which router to buy I came across an article showing the 1010 in a homemade mini table!
I’m pretty sure it was on this forum. However, I’ve searched and can’t track it down!
Does anyone know if it exist here, or anywhere else for that matter??
Thanks, Dave (Kent, UK)

Jerry Works published an article several years ago; Making the Festool Multi-Function Table into vertical and horizontal router tables the easy way  Maybe that's is what you remember seeing:
http://thedovetailjoint.squarespace.com/storage/Adding%20routers%20to%20a%20Festool%20MFT%20reduced.pdf

 

[kerf]

Jerry Works published an article several years ago; Making the Festool Multi-Function Table into vertical and horizontal router tables the easy way  Maybe that's is what you remember seeing:
http://thedovetailjoint.squarespace.com/storage/Adding%20routers%20to%20a%20Festool%20MFT%20reduced.pdf

That isn't the article, unfortunately, but very interesting all the same..!
Thanks for posting the link  [smile]