OF2200 & Leigh Adaptor?

[Wuffles]

Hands up, I'm awful at searching sometimes, but I can't seem to figure out which adaptor I'd need to use my UJK bushings in an OF2200.

Some chart I looked at said it's different in US & outside US and that a further adaptor might also be required outside US. Axminster seem to sell an adaptor for the OF2000.

Which part do I need please knowledge bank?

Upgrading from an OF1400 with loads of goodies if anyone in the UK is after one.

 

[GarryMartin]

For the UJK bushings, you need the Festool 494627 KRA-ZOLL/OF 2200 Adapter.

If you're using the Leigh bushings, the OF 2200 is one of the more complicated set ups. The below PDF link will give you the detail you need.

https://www.leighjigs.com/download/gb_and_adaptor_chart.pdf

There is also an excellent thread on the issue and Leigh's response here...

http://festoolownersgroup.com/festool-tool-problems/of2200-and-leigh-d4r-dovetail-jig-guide-bush-problem/

 

[Wuffles]

For the UJK bushings, you need the Festool 494627 KRA-ZOLL/OF 2200 Adapter.

If you're using the Leigh bushings, the OF 2200 is one of the more complicated set ups. The below PDF link will give you the detail you need.

https://www.leighjigs.com/download/gb_and_adaptor_chart.pdf

There is also an excellent thread on the issue and Leigh's response here...

http://festoolownersgroup.com/festool-tool-problems/of2200-and-leigh-d4r-dovetail-jig-guide-bush-problem/

Cheers Garry. It is indeed the UJK bushings so I'm good to go. The pdf is the one I found before and seems (as you say) to make things complicated.

Also, with notifications not working and randomly the forum marking all messages as read for me, I was lucky to see this post. Didn't show up in my unread messages, just happened to press the "replies" button and saw it.