mheffernan
Member
- Joined
- Jul 25, 2014
- Messages
- 20
Up for sale is a PM701 Bench top Mortiser (retails for $489.00). I custom built a riser stand with a Grizzly G1064 X/Y Cross slide vise (retails for $50.95). It also comes with the original base, fence, stock hold-down and roller hold downs.
Also included in the package:
-Set/4 Lee Valley premium hollow mortise chisel/bits - 1/4", 5/16", 3/8", 1/2" (all barely used) retails for $169.00
-CMT #543.158.51 5/8" with 3/4" shank hollow chisel/bit (brand new) retails for $26.00
-Lee Valley honing cones (set of 2) retails for $27.50
-Rockler steel shop stand with total lock swivel casters retails for $180.00
-Manual
I've had this for a few years, but I've rarely used it. Most of my mortises are by hand, or with my FMT.
Time for it to be put to use by another woodworker.
Total purchase cost, not including the custom riser was about $940
Selling for $550, local pick-up, Zip 19031
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
[attachimg=5]
[attachimg=6]
Also included in the package:
-Set/4 Lee Valley premium hollow mortise chisel/bits - 1/4", 5/16", 3/8", 1/2" (all barely used) retails for $169.00
-CMT #543.158.51 5/8" with 3/4" shank hollow chisel/bit (brand new) retails for $26.00
-Lee Valley honing cones (set of 2) retails for $27.50
-Rockler steel shop stand with total lock swivel casters retails for $180.00
-Manual
I've had this for a few years, but I've rarely used it. Most of my mortises are by hand, or with my FMT.
Time for it to be put to use by another woodworker.
Total purchase cost, not including the custom riser was about $940
Selling for $550, local pick-up, Zip 19031
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
[attachimg=5]
[attachimg=6]
