Pre-Order Your CMS, TI 15, or MFH 1000 Now!

[tbellemare]

It's time to get in your pre-orders for the Festool router table, impact drill/driver, or Multi-Function Stool.

These will ship October 1 and the authorization of a credit card will expire after 30 days, so the best thing to do is call or email me to indicate your desire.

There are 4 different packages for the CMS. Two are stand alone and two attach to the MFT/3.

Stand alone...

CMS-GE Router Table Set
Includes:
Router Table, Router Module and Fence, Auxilliary
Dust Hood w/ Starting Pin, Miter Gauge, Sliding
Table, Table Extension, Dust Extraction Hose Set
$1600

CMS-GE Router Table
Includes:
Router Table, Router Module and Fence,
Auxilliary Dust Hood w/ Starting Pin
$1200

MFT/3 Extension...

CMS-VL MFT/3 Router Table Set
Includes:
MFT/3 Router Table Extension, Router Module and
Fence, Auxilliary Dust Hood w/ Starting Pin, Miter
Gauge, Sliding Table, Dust Extraction Hose Set
$1300

CMS-VL MFT/3 Router Table
Includes:
MFT/3 Router Table Extension, Router Module and
Fence, Auxilliary Dust Hood w/ Starting Pin
$1000

There are two ways too buy the TI 15...

TI 15 Li 3.0 Ah
Includes:
Drill/Driver Adapter, Keyless Chuck,
CentrotecœChuck, 2 Batteries (14.4 V 3.0 Ah),
Charger, Centrotec Impact Bit Holder, Systainer 1
$525

TI 15 Li 3.0 Ah Basic
Includes:
Drill/Driver Adapter, Centrotec
Impact Bit Holder, Systainer 3 with foam insert
ready for additional drill and components
$350

The new Multi-Function Stool, MFH 1000, can be used as a stool or a place to mount your WCR.
$350

I will have all of this stuff on my website later today, including the accessories for the CMS.

Tom

 

[GPowers]

Very nice to see the TI 15 is being sold in a set and Basic (no chucks or batteries). But why the Systainer 1 with the set and Systainer 3 with the basic??

 

[Brice Burrell]

Very nice to see the TI 15 is being sold in a set and Basic (no chucks or batteries). But why the Systainer 1 with the set and Systainer 3 with the basic??

Shane posted pics of the Sys3 for the basic impact.  It has room for all the accessories and a second drill.
[attachthumb=#]

 

[tbellemare]

The SYS 1 is for just the TI 15 similar to the other drills.

The Basic comes in a SYS 3 that has accommodation for your existing Festool drill set plus the TI 15.

Tom

EDIT:
Someone beat me to it...

 

[GPowers]

Thanks Brice and Tom.

To bad,  I would still like the basic TI 15 in a Systainer 1, like all the other drills.

 

[tbellemare]

I just finished adding all the new products on my website.

I'll be adding more content as time goes by but it's pretty complete now including contents of the various offerings.

Tom

 

[andvari]

It's time to get in your pre-orders for the Festool router table, impact drill/driver, or Multi-Function Stool.

Oh good. I've been thinking about a router table. Glad Festool is finally sending this over here.

Need to research this now.

 

[Kev]

The basic Ti15 Sys3 package plus a T15 set is an awesome way to go ... wish I had done it.

 

[tjbnwi]

Just sent you a note, the CMS-GE please.

Tom

 

[Kevin D.]

Not sure if this is the right place to ask this question, but here goes.....does it make sense to own a standard Festool T15 drill any longer?  Or are there benefits inherent in the T15 still in comparison to the Hybrid coming out in October?

I wish this was out sooner.  I've got two sheds and a deck to build in my backyard before winter kicks in, and would love to get one sooner than Oct.  Wonder if Shane is looking for any Beta/Pre-Release testers?  [big grin]

 

[Brice Burrell]

Not sure if this is the right place to ask this question, but here goes.....does it make sense to own a standard Festool T15 drill any longer?  Or are there benefits inherent in the T15 still in comparison to the Hybrid coming out in October?

I wish this was out sooner.  I've got two sheds and a deck to build in my backyard before winter kicks in, and would love to get one sooner than Oct.  Wonder if Shane is looking for any Beta/Pre-Release testers?  [big grin]

Oh boy, I hope JMB doesn't see this post. [big grin] Check out this tread where JMB gives some his thoughts on the TI15.  Festool impact drill.

 

[Kev]

Not sure if this is the right place to ask this question, but here goes.....does it make sense to own a standard Festool T15 drill any longer?  Or are there benefits inherent in the T15 still in comparison to the Hybrid coming out in October?

I wish this was out sooner.  I've got two sheds and a deck to build in my backyard before winter kicks in, and would love to get one sooner than Oct.  Wonder if Shane is looking for any Beta/Pre-Release testers?  [big grin]

T15 + Ti15 is a nice combo. the Ti15 is foremost an impact driver and can do a reasonable job of drilling - but does not match the T15 in overall drilling performance. By getting the basic kit you get the best of both and save on components).

 

[AlexThePalex]

does it make sense to own a standard Festool T15 drill any longer?  Or are there benefits inherent in the T15 still in comparison to the Hybrid coming out in October?

It makes a lot of sense to have a T15, because the Ti15 isn't quite what you'd hope/want/expect it to be. In fact, the thing is a disappointment, in my humble opinion. For myself, if I needed a new impact driver, I'd go for another brand and get a real one instead of Festool's whatcha-ma-call-it...

 

[jmbfestool]

Not sure if this is the right place to ask this question, but here goes.....does it make sense to own a standard Festool T15 drill any longer?  Or are there benefits inherent in the T15 still in comparison to the Hybrid coming out in October?

I wish this was out sooner.  I've got two sheds and a deck to build in my backyard before winter kicks in, and would love to get one sooner than Oct.  Wonder if Shane is looking for any Beta/Pre-Release testers?  [big grin]

Oh boy, I hope JMB doesn't see this post. [big grin] Check out this tread where JMB gives some his thoughts on the TI15.  Festool impact drill.

I did see the post  [tongue] but I have said my peace if people want to buy it, its up to them you have your 30day money back so give it a try im sure people will b using that service.  

Just some advice if people really really want the Ti15 I recommend only to buy the drill bare if you already own a T15 if not then still buy the Ti15 bare and buy a T15 awell lol  because as an impact it's okay anything else.... you know my thoughts on that.

I personally wouldn't buy it at all not worth it. I'm waiting for the newer festool impact which should be coming end of the year most likely.

Jmb

 

[Administrator_JSVN]

JMB, not sure where you're getting your info, but there's no new impact in the works.

 

[jmbfestool]

JMB, not sure where you're getting your info, but there's no new impact in the works.

We will see

 

[ajones]

JMB, not sure where you're getting your info, but there's no new impact in the works.

We will see

That made me chuckle my moneys on Jmb [big grin]

 

[RONWEN]

JMB, not sure where you're getting your info, but there's no new impact in the works.

We will see

That made me chuckle my moneys on Jmb [big grin]

I take that as an implication that a high number of Festool TI 15 returns will force an engineering catch-up with a redesigned tool?

 

[Brice Burrell]

JMB, not sure where you're getting your info, but there's no new impact in the works.

We will see

[thumbs up]

 

[tjbnwi]

I just pre-ordered MY CMS-GE, with a few other items. Shows a delivery date of 2012-09-07. WhoooooooooHooooooooooo. It will be here next week!!!!!

Tom