MahalaHomecraft
Member
- Joined
- Sep 25, 2013
- Messages
- 149
Any interested parties please contact me directly at slugbutter@hotmail.com.
Selling a c12 drill with 2 Ni-MH batteries that still charge quickly and hold the charge well, charger, classic systainer, and all the chucks: right angle, eccentric, centrotec, depth stop (for drywall), and keyless. Asking 350 shipped cusa.
Also selling an ets125, in decent shape, in a t loc, with an extra t loc with about 200 sheets of festool paper in various grits. $200 shipped cusa.
Also selling an ro 90 with a hard pad, interface pad, and long nose delta pad. This one is in excellent shape, and includes another t loc with about 500 sheets of round and delta festool paper in a variety of grits. 630 shipped cusa.
I have an old cdd12fx with 2 shot batteries, charger and systainer insert, too. I'll throw this in for free with purchase of some other stuff, or sell it cheap if anyone wants it, let's say $60 shipped.
I will also include all the non-festool stuff I'm selling, in case anyone is interested. The following prices do not include shipping.
Quikdrive screwgun attachment with extension and adapter for dewalt screwgun, as well as extra square bits, in a case. $75
Fein multimaster, older model with hex key blade lock, in excellent condition. $75
Hitachi 2" Brad nailer, great condition. $50
Hilti dx451 powder actuated nailer, for parts $20
Senco cordless finish nailer, 2 shot batteries, charger, case, good condition. $30
Porter cable 6902 router on a 931 plunge base with a metal toolbox that wasn't made for it but fits it perfectly, with 1/2" and 1/4" chucks and rails to attach an edge guide. Excellent condition, 1 3/4 hp. $150
Freud 8" Dado set, brand new. Model sd208. $65
Bosch t1b miter saw stand, excellent condition. $100
Dewalt dw706 12" dual bevel compound miter saw, pristine condition. $200
Ridgid 10" single bevel compound miter saw, had a crack in the handle which I repaired, otherwise very good condition. $130
Milwaukee 12" dual bevel sliding compound miter saw, model 6955-20. Many parts recently replaced, including the micro adjust miter assembly. $400
Hitachi miter saw motor. This is actually all of the saw from the neck up, could probably do something cool with it if you're creative.
$25
Dewalt 14.4v impact driver and finish nailer in a case with 2 batteries and a charger, batteries work great. Also includes a large work light which runs off the batteries, and 2 extra fluorescent bulbs for the light. $250
People in this forum know what this stuff is worth. All reasonable offers will be entertained. I'm shipping from long island so bear in mind the cost of shipping based on where you're located. Thanks.
Selling a c12 drill with 2 Ni-MH batteries that still charge quickly and hold the charge well, charger, classic systainer, and all the chucks: right angle, eccentric, centrotec, depth stop (for drywall), and keyless. Asking 350 shipped cusa.
Also selling an ets125, in decent shape, in a t loc, with an extra t loc with about 200 sheets of festool paper in various grits. $200 shipped cusa.
Also selling an ro 90 with a hard pad, interface pad, and long nose delta pad. This one is in excellent shape, and includes another t loc with about 500 sheets of round and delta festool paper in a variety of grits. 630 shipped cusa.
I have an old cdd12fx with 2 shot batteries, charger and systainer insert, too. I'll throw this in for free with purchase of some other stuff, or sell it cheap if anyone wants it, let's say $60 shipped.
I will also include all the non-festool stuff I'm selling, in case anyone is interested. The following prices do not include shipping.
Quikdrive screwgun attachment with extension and adapter for dewalt screwgun, as well as extra square bits, in a case. $75
Fein multimaster, older model with hex key blade lock, in excellent condition. $75
Hitachi 2" Brad nailer, great condition. $50
Hilti dx451 powder actuated nailer, for parts $20
Senco cordless finish nailer, 2 shot batteries, charger, case, good condition. $30
Porter cable 6902 router on a 931 plunge base with a metal toolbox that wasn't made for it but fits it perfectly, with 1/2" and 1/4" chucks and rails to attach an edge guide. Excellent condition, 1 3/4 hp. $150
Freud 8" Dado set, brand new. Model sd208. $65
Bosch t1b miter saw stand, excellent condition. $100
Dewalt dw706 12" dual bevel compound miter saw, pristine condition. $200
Ridgid 10" single bevel compound miter saw, had a crack in the handle which I repaired, otherwise very good condition. $130
Milwaukee 12" dual bevel sliding compound miter saw, model 6955-20. Many parts recently replaced, including the micro adjust miter assembly. $400
Hitachi miter saw motor. This is actually all of the saw from the neck up, could probably do something cool with it if you're creative.
$25
Dewalt 14.4v impact driver and finish nailer in a case with 2 batteries and a charger, batteries work great. Also includes a large work light which runs off the batteries, and 2 extra fluorescent bulbs for the light. $250
People in this forum know what this stuff is worth. All reasonable offers will be entertained. I'm shipping from long island so bear in mind the cost of shipping based on where you're located. Thanks.