Spray finishing.

[lambeater]

Question for the spray and finishing experts. Sprayed a Bamboo panel with my old gun using General Satin enduro Var. Just noticed after install that part had a dry dust overspray area on it which I didn't notice before. Finish is still smooth but kinda dusty. What is the best way to polish this out and return the satin.

Thx
Lambeater

 

[tiralie]

I wouldn't try to buff the finish back. It's difficult at least for me to match the sheen.
Enduro burns in well so I would just lightly sand the dust off with some 400, and then wipe thinned enduro over the entire surface to bring the sheen back up to satin.
You can buff gloss back to a satin with 0000 steel wool but I have never tried it.
Tim