sys-port 1000/2 clean up question

[festal]

So i came across sys-port 1000/2 and it does need a bit of clean up. 
Drawer slides are working but a bit sticky with all the grime and wood dust cacked in.

Whats a good grease to grease them back up after i'm done cleaning them?
Quick search shows that white lithium grease works well. I have some ballistol, dry lube and marine blue grease.  Trying to see what works best?

Also is there  away to disable the green button to open "feature"?

 

[Chris1970]

No can help but did you buy the one in Hampton?

 

[festal]

No can help but did you buy the one in Hampton?

Is that the one for listed for $800 and been there for over a year?

 

[Chris1970]

Yeah it’s been on a loooooong time.

 

[Crazyraceguy]

Balistol should be good for this. It's a cleaner and lube. It may turn out to be too sticky though and attract the dust again?
What I have been using lately is a product called "Slip it". It is really designed to work with wood to wood contact, like old fashioned drawers with wood runners, but it works great on ball-bearing drawer guides. It goes on in a very thin film that feels somewhere between wax and grease, but doesn't dry/harden.

 

[festal]

Balistol should be good for this. It's a cleaner and lube. It may turn out to be too sticky though and attract the dust again?
What I have been using lately is a product called "Slip it". It is really designed to work with wood to wood contact, like old fashioned drawers with wood runners, but it works great on ball-bearing drawer guides. It goes on in a very thin film that feels somewhere between wax and grease, but doesn't dry/harden.

Ended up using marine grease (can you say overkill) but thats what i had.  Then managed to find white lithium grease and used that for the rest of the slides.

Sent from my iPhone using Tapatalk