T-Loc inserts / inlays

[Paul_HKI]

Hoping folks could spare a minute or two to help a guy out.

Looking for the part numbers for T-Loc inserts to suit the following tools:

Rotex 150 FEQ (current type) - Answer:  700879 T-Loc 3 size
RAS 115 (all old now)
ETS 150/5 EQ (Not the 'newer' EC type)
RTS 400 R (current type)

Finally, not sure if it exists, but if there's an insert to suit a T18+3 and take a TCL6 or 8 charger instead of the TCL3, that would be most helpful.

If you have these tools supplied in the T-Loc systainer, the part number is the usual 6 digit number format, moulded into the insert.

Want to retire a couple of battered classic systainers and get rid of a couple of Sys3, which I really don't like.

If you could help out, I'd appreciate it.  Tried finding some sort of list of same but have had no luck so far.

 

[squall_line]

EKAT appears to have the inserts under the "workplace organization" section, under the TLoc Systainers.

Take this with a grain of salt; it would be beneficial if someone who has one of these could verify against the EKAT listing:

700839 - Bedding Sys RAS 115
700868 - Bedding Sys RS/RTS 400
708098 - Liner RS/RTS 400 REQ

 

[Paul_HKI]

Total gent.  Thanks very much.  I tried looking in the EKAT before, but it's only in the past couple of days/weeks that they've made it possible to switch the language from Finnish to English.  Anyway, that's a great help - thanks again.