Waiting for kapex 120 ug set to be delivered

[Paul-w]

I just can't wait!!!
Anyone have any advice on this amazing looking tool?

 

[copcarcollector]

You got the extension wings too? Make sure that you carefully align their clamps and tighten them well, otherwise the extensions wobble all over the place. Use care when folding the saw down to the travel position, and good luck getting the extensions back into the plastic end cap holders, I cant figure that out! Also, use care when attaching the clamps to the bottom of the Kapex saw itself before attaching it to the UG cart, I was doing mine on a table and the saw fell on the floor! OOPS!
Happy cutting.

 

[Paul-w]

That's some good advice I appreciate the little know how's!
I'll be sure not to drop my saw tho I think I'd be in tears

I got into buying festool last year and I can't get enough!!

Totally addicted lol

MFT 3 next

 

[Paul-w]

Oh and yes I got the trolley with side wings too

 

[DB10]

If you haven't already,  download the supplementary manual for the. kapex so you can familiarise yourself with all the saws features, I keep a printed version in the workshop that I still refer to from time to time.

 

[fignewton]

I just got one from Gr8trim4U (Thanks again!!) after thinking about one for a long time and i LOVE it.  Set-up and take down/storing takes only a couple of minutes. Here's a couple of observations:  1) Download the manual and pay attention to the pics.  2)When mounting the saw on the stand, get a helper!  3) Pay attention to where the big "washer" looking things on the piping of the stand.  There are corresponding markers (look like !) on the plastic mounts, and these should line up together. If not, it won't go together as you'll be too far front or back.  4) To store the extensions in their holders, again look at the pics.  Fold the flip stops UP, then place the two faces together with the fences opposite each other (legs out).  Then put the caps on.

 

[Mikeyfondu]

Congrats i love mine .  I found this video to be great .
Enjoy !