Will Kapex 120 portable Extensions work with my 34"H Table?

[jlsharp]

Hi everyone! I'm new to this group & also new to the wonderful world of Festool tools!
I just purchased a Kapex 120,  Rotex RO 90 DX,  CT 48 AC  & Cyclone separator. Next purchase will be deciding between a ETS EC 125/3 or the 150/5.
My question: I'm going to mount my Kapex on a small mobile tool table that is 34" H x 36" W x 24" D. I'm wanting to purchase the Kapex Mobile Ext. Wings for it to use when cutting longer stock but can't find the height range of the adjustable legs on the extensions?
Can anyone tell me if the extension legs have enough height adjustment to work with the Kapex mounted on my 34" high table?  Thanks in advance for any help!

 

[jwbcommon]

The height adjustment on the legs is really just for leveling, not height adjustment. My Kapex is on a table that is 32 3/4” and I can’t level the extension with adjustment. I put a 2x4 block under the leg and then it will reach. The block works fine though.

 

[semenza]

Welcome to the forum!  [smile]

    Table / stand height for Kapex to work with extensions is 31".  As has been said you could place blocks under extension legs in order to use a higher table.

Seth

 

[jlsharp]

The height adjustment on the legs is really just for leveling, not height adjustment. My Kapex is on a table that is 32 3/4” and I can’t level the extension with adjustment. I put a 2x4 block under the leg and then it will reach. The block works fine though.

Thanks!

 

[jlsharp]

Welcome to the forum!  [smile]

    Table / stand height for Kapex to work with extensions is 31".  As has been said you could place blocks under extension legs in order to use a higher table.

Seth

Thanks!