Woodpecker router table for MFT, clearance

[Wood_Junkie]

Go to:  http://www.woodpeck.com/specials.html

Scroll down / search for:  "Special - Giant Router Tables"
Or, here is a direct link:  http://www.woodpeck.com/specials.html#1595

If I'm reading this right, it is a WP router table for the MFT1080.   Size is 45-3/4" x 28-1/2"

They're on clearance for $99.  Until midnight this Thursday (9.9.2010) you can also use a SALE10" coupon code for 10% off.  Shipping might spoil the deal.  It's $19 to me in Madison, about $37 to southern California

Note that a router plate and fence are additional purchases.

 

[nickao]

They are definitely worth 99.00 for sure. Just make sure you buy the under supports(steel L's) or make your own because it will warp. Or attach it to a top instead of sitting in the MFT.

I had several of the Pinnacle tops(from Woodpecker), different sizes. I think I may still have one or two of the smaller ones laying around. The large ones are next to impossible to get flat if you let them warp.

 

[tbellemare]

Are these laminated MDF? I didn't catch how thick they are?

Thanks,

Tom

 

[nickao]

Well I did not have the one to drop into the MFT, but I assume it is the same, at least I hope so..

The ones I purchased  are 1.5 MDF with a nice laminate on both sides wrapped with a plastic T mold. Obviously the MFT unit does not have the T mold wrap.

The solid phenolic is nice, but they are chipped, still for the price the material would cost that much easy. I like the black(24 x 32 x 3/4 thick):

 

[tbellemare]

3/4" cotton impregnated phenolic is pretty stiff, durable stuff. I'd still rather have a more modern material but that thought might be based on unrealistic overkill.

Tom

 

[Wood_Junkie]

Are these laminated MDF? I didn't catch how thick they are?

Thanks,

Tom

If it's the same as the "standard" WP router table I have, it's about 1.5" thick.

 

[honeydoman]

i just got their new pholinc top yesterday that I bought at the IWF show a week or so ago.  I got the fence and the new lift.  it works great..  I am going to use it this weekend making some cabinet doors.

I have had both types of tops and either works great just watch for warping on the mdf ones.

but for 99 bucks that is a good deal and a nice size top.  woodpeckers is a fine company.  they are just clearing them out since 1080 is no longer made