14mm router bit

[lerberg1969@gmail.com]

Hello!

Somebody have a link to a good 14mm router bit, with a 12mm shank?? I should use it with the APS900 and with a hard woodplank. The bits from Festool is buring up to fast..........

 

[luvmytoolz]

Hello!

Somebody have a link to a good 14mm router bit, with a 12mm shank?? I should use it with the APS900 and with a hard woodplank. The bits from Festool is buring up to fast..........

Are you using HSS or TCT cutters? If HSS they are pretty easy to get smoking.

You might need to supply more info, like location for starters, 2 flute, bearing, etc, etc.

 

[lerberg1969@gmail.com]

Sorry, I am using the Festool routers, both OF1400 and OF2200

 

[woodbutcherbower]

Where are you located?

 

[lerberg1969@gmail.com]

In Norway

 

[guybo]

Hi, I have good success with the ent bits.I bought off amazon but cant find them there any more .maybe here for you.https://www.sautershop.com/straight-cutter-d-14-mm-e-11131?c=14382

 

[lerberg1969@gmail.com]

[member=58842]guybo[/member], what do you think about the spiral groove bit, could that be better then the straight cutters??

 

[guybo]

Hi, I am in the states we have a hard time finding good quality 8mm shank bits,woodbutcherbower said the ent bit were good quality,so I tried them and they are,I own several spiral upcut bits they produce nice clean cuts, no working knowledge of the aps900 look like a nice jig for tops,it worth a try w/shallow cuts.

 

[woodbutcherbower]

[member=63921]lerberg1969@gmail.com[/member] I don't know if Trend have representation in Norway, but friends of mine in Sweden, Finland and Denmark have all successfully bought cutters online by mail order. Their range is absolutely huge - including a 2-flute 14mm TCT with a half-inch (12.7mm) collet;
https://www.trend-uk.com/products/r...-router-cutters/straight-flute-router-cutters

Kevin