36mm x 16foot hose with Plug It cord.

I have a nice TS55 REB which I purchased from the recon site that I'm not using, and would like to see if there is anyone who may have a lightly used TS 75 that they find too heavy or just want to trade for a battery saw.

I'm in Richmond VA. I'd prefer to deal with someone who is within driving distance and trade.

I think that other than the trade that I could just sell my saw and order a new one. I'd sell it for $660, the cost of the TS75, buyer pays for the shipping.

Thanks for looking!

Sent from my Pixel XL using Tapatalk

 
I have a nice TS55 REB which I purchased from the recon site that I'm not using, and would like to see if there is anyone who may have a lightly used TS 75 that they find too heavy or just want to trade for a battery saw.

I'm in Richmond VA. I'd prefer to deal with someone who is within driving distance and trade.

I think that other than the trade that I could just sell my saw and order a new one. I'd sell it for $660, the cost of the TS75, buyer pays for the shipping.

Thanks for looking!

Sent from my Pixel XL using Tapatalk

 
I have a nice TS55 REB which I purchased from the recon site that I'm not using, and would like to see if there is anyone who may have a lightly used TS 75 that they find too heavy or just want to trade for a battery saw.

I'm in Richmond VA. I'd prefer to deal with someone who is within driving distance and trade.

I think that other than the trade that I could just sell my saw and order a new one. I'd sell it for $660, the cost of the TS75, buyer pays for the shipping.

Thanks for looking!

Sent from my Pixel XL using Tapatalk

 
I have a nice TS55 REB which I purchased from the recon site that I'm not using, and would like to see if there is anyone who may have a lightly used TS 75 that they find too heavy or just want to trade for a battery saw.

I'm in Richmond VA. I'd prefer to deal with someone who is within driving distance and trade.

I think that other than the trade that I could just sell my saw and order a new one. I'd sell it for $660, the cost of the TS75, buyer pays for the shipping.

Thanks for looking!

Sent from my Pixel XL using Tapatalk

 
I have a nice TS55 REB which I purchased from the recon site that I'm not using, and would like to see if there is anyone who may have a lightly used TS 75 that they find too heavy or just want to trade for a battery saw.

I'm in Richmond VA. I'd prefer to deal with someone who is within driving distance and trade.

The saw has ripped about 5 feet of 8/4 cherry and stored in the spare bedroom closet since last fall. It has the non Airstream batteries and TCL chargers. I find that it does have a little bit more power than the corded version.

I think that other than the trade that I could just sell my saw and order a new one. I'd sell it for $660, the cost of the TS75, buyer pays for the shipping.

Thanks for looking!

Sent from my SM-T230NU using Tapatalk

 
I have a nice TS55 REB which I purchased from the recon site that I'm not using, and would like to see if there is anyone who may have a lightly used TS 75 that they find too heavy or just want to trade for a battery saw.

I'm in Richmond VA. I'd prefer to deal with someone who is within driving distance and trade.

The saw has ripped about 5 feet of 8/4 cherry and stored in the spare bedroom closet since last fall. It has the non Airstream batteries and TCL chargers. I find that it does have a little bit more power than the corded version.

I think that other than the trade that I could just sell my saw and order a new one. I'd sell it for $660, the cost of the TS75, buyer pays for the shipping.

Thanks for looking!

Sent from my SM-T230NU using Tapatalk

 
I have a nice TS55 REB which I purchased from the recon site that I'm not using, and would like to see if there is anyone who may have a lightly used TS 75 that they find too heavy or just want to trade for a battery saw.

I'm in Richmond VA. I'd prefer to deal with someone who is within driving distance and trade.

The saw has ripped about 5 feet of 8/4 cherry and stored in the spare bedroom closet since last fall. It has the non Airstream batteries and TCL chargers. I find that it does have a little bit more power than the corded version.

I think that other than the trade that I could just sell my saw and order a new one. I'd sell it for $660, the cost of the TS75, buyer pays for the shipping.

Thanks for looking!


Sent from my SM-T230NU using Tapatalk

 
I have a nice TS55 REB which I purchased from the recon site that I'm not using, and would like to see if there is anyone who may have a lightly used TS 75 that they find too heavy or just want to trade for a battery saw.

I'm in Richmond VA. I'd prefer to deal with someone who is within driving distance and trade.

The saw has ripped about 5 feet of 8/4 cherry and stored in the spare bedroom closet since last fall. It has the non Airstream batteries and TCL chargers. I find that it does have a little bit more power than the corded version.

I think that other than the trade that I could just sell my saw and order a new one. I'd sell it for $660, the cost of the TS75, buyer pays for the shipping.

Thanks for looking!

Sent from my SM-T230NU using Tapatalk

 
Has anyone used this stand with the kapex miter saw. Very tempting for 269 at Amazon right now.

Sent from my Pixel XL using Tapatalk

 
I recently had the need to trim a 2" strip from a 16' board that was not straight. I thought that this accessory would do the trick, but I'm having trouble controlling the saw with this guide. I've looked for something in this guide on YouTube and this forum, but I can't find anything.
Had anyone purchased the festool parallel side fence and had success with it?
Thanks

Sent from my XT1650 using Tapatalk

 
I recently had the need to trim a 2" strip from a 16' board that was not straight. I thought that this accessory would do the trick, but I'm having trouble controlling the saw with this guide. I've looked for something in this guide on YouTube and this forum, but I can't find anything.
Had anyone purchased the festool parallel side fence and had success with it?
Thanks

Sent from my XT1650 using Tapatalk

 
I recently had the need to trim a 2 in strip from a 16 ft board that was not straight. I thought that this accessory would do the trick, but I'm having trouble controlling the saw with this guide. I've looked for something in this guide on YouTube and this forum, but I can't find anything.
Had anyone purchased the festool parallel side fence and had success with it?
Thanks

Sent from my XT1650 using Tapatalk

 
I recently had the need to trim a 2 in strip from a 16 ft board that was not straight. I thought that this accessory would do the trick, but I'm having trouble controlling the saw with this guide. I've looked for something in this guide on YouTube and this forum, but I can't find anything.
Had anyone purchased the festool parallel side fence and had success with it?

Sent from my XT1650 using Tapatalk

 
I recently had the need to trim a 2 in strip from a 16 ft board that was not straight. I thought that this accessory would do the trick, but I'm having trouble controlling the saw with this guide. I've looked for something in this guide on YouTube and this forum, but I can't find anything.
Had anyone purchased the festool parallel side fence and had success with it?

Sent from my XT1650 using Tapatalk

 
I recently had the need to trim a 2 in strip from a 16 ft board that was not straight. I thought that this accessory would do the trick, but I'm having trouble controlling the saw with this guide. I've looked for something on this guide on YouTube and in this forum, but I can't find anything.
Has anyone purchased the festool parallel side fence and had success with it?

Sent from my XT1650 using Tapatalk

 
I recently had the need to trim a 2 in strip from a 16 ft board that was not straight. I thought that this accessory would do the trick, but I'm having trouble controlling the saw with this guide. I've looked for something on this guide on YouTube and in this forum, but I can't find anything.
Has anyone purchased the festool parallel side fence and had success with it?

Sent from my XT1650 using Tapatalk

 
I'm making some jigs and fixtures with the intent of making broad use of my one-hand quick clamps... rather than buying t-track I'm routing grooves - the lack of channel material means the substrate (3/4" ply) is thicker. It took quite a few tests to make my router bit work, but I was finally able to make the perfect slot for the quick clamps with four passes through the router table. I think I've sourced one that will let me do it in two, but how great would it be if there was a router bit to slot wood at exactly the right thickness/size? I know this is a bit of a niche, but i bet it would bring smiles to a lot of faces!

Sent from my SM-G920W8 using Tapatalk

 
I'm making some jigs and fixtures with the intent of making broad use of my one-hand quick clamps... rather than buying t-track I'm routing grooves - the lack of channel material means the substrate (3/4" ply) is thicker. It took quite a few tests to make my router bit work, but I was finally able to make the perfect slot for the quick clamps with four passes through the router table. I think I've sourced one that will let me do it in two, but how great would it be if there was a router bit to slot wood at exactly the right thickness/size? I know this is a bit of a niche, but i bet it would bring smiles to a lot of faces!

Sent from my SM-G920W8 using Tapatalk

 
I would like to make a sloped grove in cutting boards, counter tops etc.

Any one ever done this?

Sent from my SM-G935W8 using Tapatalk

 
You must log in or register to reply here.

Similar threads

H
For Sale 3.5m integrated sleeve and plug-It-Cord dust Hose
Replies
0
Views
353
Hawk Nest
H
Wood_Slice
ONE HOSE TO RULE THEM ALL
2
Replies
32
Views
13K
Cypren
C
D
CT 36E with Sleeved Anti-Static Hose and Plug it Cord
Replies
6
Views
1K
gunnyr
gunnyr
P
Need a 16 GA plug it cord for sleeving with a 16 foot Nilfisk AS hose
Replies
1
Views
1K
Mario Turcot
Mario Turcot
J
SOLD: Festool 500276 Hose D27/22x3.5m with Sleeve and Power Cord In SYS 3
Replies
0
Views
1K
Jim_Kirk
J
Back
Top