36mm x 16foot hose with Plug It cord.

I would like to make a sloped grove in cutting boards, counter tops etc.

Any one ever done this?

Sent from my SM-G935W8 using Tapatalk

 
I would like to make a sloped grove in cutting boards, counter tops etc.

Any one ever done this?

Sent from my SM-G935W8 using Tapatalk

 
I just got a bunch of new toys in the other day and I'm working on building some shelves and trying to join 2 55" lr32 guide rails. I have the rail connectors and I know how to join them together, but my question is more so how do you make sure the holes are exact 32mm apart without having to measure. Is there a piece you can fit in the holes to align? I measured the best I could to see what it looks like and it seems like there is a pretty decent gap.

Suggestions would be greatly appreciated
0f65e67804730460fe58dd80ab71a61a.jpg
 
I just got a bunch of new toys in the other day and I'm working on building some shelves and trying to join 2 55" lr32 guide rails. I have the rail connectors and I know how to join them together, but my question is more so how do you make sure the holes are exact 32mm apart without having to measure. Is there a piece you can fit in the holes to align? I measured the best I could to see what it looks like and it seems like there is a pretty decent gap.

Suggestions would be greatly appreciated
0f65e67804730460fe58dd80ab71a61a.jpg
 
I just got a bunch of new toys in the other day and I'm working on building some shelves and trying to join 2 55" lr32 guide rails. I have the rail connectors and I know how to join them together, but my question is more so how do you make sure the holes are exact 32mm apart without having to measure. Is there a piece you can fit in the holes to align? I measured the best I could to see what it looks like and it seems like there is a pretty decent gap.
dc55152e65af813d6567836caec2c1a0.jpg
 
I just got a bunch of new toys in the other day and I'm working on building some shelves and trying to join 2 55" lr32 guide rails. I have the rail connectors and I know how to join them together, but my question is more so how do you make sure the holes are exact 32mm apart without having to measure. Is there a piece you can fit in the holes to align? I measured the best I could to see what it looks like and it seems like there is a pretty decent gap.

Can't seem to upload a picture right now with this app
 
I just got a bunch of new toys in the other day and I'm working on building some shelves and trying to join 2 55" lr32 guide rails. I have the rail connectors and I know how to join them together, but my question is more so how do you make sure the holes are exact 32mm apart without having to measure. Is there a piece you can fit in the holes to align? I measured the best I could to see what it looks like and it seems like there is a pretty decent gap.

Can't seem to upload a picture right now with this app
 
I just got a bunch of new toys in the other day and I'm working on building some shelves and trying to join 2 55" lr32 guide rails. I have the rail connectors and I know how to join them together, but my question is more so how do you make sure the holes are exact 32mm apart without having to measure. Is there a piece you can fit in the holes to align? I measured the best I could to see what it looks like and it seems like there is a pretty decent gap.

Can't seem to upload a picture right now with this app

Sent from my SAMSUNG-SM-G890A using Tapatalk

 
I just got a bunch of new toys in the other day and I'm working on building some shelves and trying to join 2 55" lr32 guide rails. I have the rail connectors and I know how to join them together, but my question is more so how do you make sure the holes are exact 32mm apart without having to measure. Is there a piece you can fit in the holes to align? I measured the best I could to see what it looks like and it seems like there is a pretty decent gap.

Can't seem to upload a picture right now with this app

Sent from my SAMSUNG-SM-G890A using Tapatalk

 
I just got a bunch of new toys in the other day and I'm working on building some shelves and trying to join 2 55" lr32 guide rails. I have the rail connectors and I know how to join them together, but my question is more so how do you make sure the holes are exact 32mm apart without having to measure. Is there a piece you can fit in the holes to align? I measured the best I could to see what it looks like and it seems like there is a pretty decent gap.
5b3e642df13c1a7e46e665098baf319a.jpg


Sent from my SAMSUNG-SM-G890A using Tapatalk

 
I just got a bunch of new toys in the other day and I'm working on building some shelves and trying to join 2 55" lr32 guide rails. I have the rail connectors and I know how to join them together, but my question is more so how do you make sure the holes are exact 32mm apart without having to measure. Is there a piece you can fit in the holes to align? I measured the best I could to see what it looks like and it seems like there is a pretty decent gap.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 
I just got a bunch of new toys in the other day and I'm working on building some shelves and trying to join 2 55" lr32 guide rails. I have the rail connectors and I know how to join them together, but my question is more so how do you make sure the holes are exact 32mm apart without having to measure. Is there a piece you can fit in the holes to align? I measured the best I could to see what it looks like and it seems like there is a pretty decent gap.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 
Trying to figure out how to attach my dust extractor to this saw

My dust port OD is 1 5/8 and I got the 27mm hose

Looking for suggestions on attachments to make this work

Thanks

Sent from my SAMSUNG-SM-G890A using Tapatalk

 
Trying to figure out how to attach my dust extractor to this saw

My dust port OD is 1 5/8 and I got the 27mm hose

Looking for suggestions on attachments to make this work

Thanks

Sent from my SAMSUNG-SM-G890A using Tapatalk

 
Trying to figure out how to attach my dust extractor to this saw

My dust port OD is 1 5/8 and I got the 27mm hose

Looking for suggestions on adapters to make this work

Thanks

Sent from my SAMSUNG-SM-G890A using Tapatalk

 
Trying to figure out how to attach my dust extractor to this saw

My dust port OD is 1 5/8 and I got the 27mm hose

Looking for suggestions on adapters to make this work

Thanks

Sent from my SAMSUNG-SM-G890A using Tapatalk

 
Trying to figure out how to attach my dust extractor to this saw

My dust port OD is 1 5/8 and I got the 27mm hose

Looking for suggestions on adapters to make this work

Thanks

Sent from my SAMSUNG-SM-G890A using Tapatalk

 
You must log in or register to reply here.

Similar threads

H
For Sale 3.5m integrated sleeve and plug-It-Cord dust Hose
Replies
0
Views
353
Hawk Nest
H
Wood_Slice
ONE HOSE TO RULE THEM ALL
2
Replies
32
Views
13K
Cypren
C
D
CT 36E with Sleeved Anti-Static Hose and Plug it Cord
Replies
6
Views
1K
gunnyr
gunnyr
P
Need a 16 GA plug it cord for sleeving with a 16 foot Nilfisk AS hose
Replies
1
Views
1K
Mario Turcot
Mario Turcot
J
SOLD: Festool 500276 Hose D27/22x3.5m with Sleeve and Power Cord In SYS 3
Replies
0
Views
1K
Jim_Kirk
J
Back
Top