I created a video that talks about my experience 3D printing parts. One of those parts is a custom end stop for the LR32 system designed for Blum Process32. It allows the holes to be 46.5mm and 62.5mm from the edge, as specified in the Blum Process32 manual.
I start talking in more detail about the end stop at about the 3 minute mark.
Very happy with the way this and my other parts came out, and thought I'd share the video here.
I start talking in more detail about the end stop at about the 3 minute mark.
Very happy with the way this and my other parts came out, and thought I'd share the video here.