50mm hose connector 3d print file?

[kwakefield]

I just bought the 50mm (non-tapered) hose and I’d like to cut it into two pieces (to go to/from the separator). I was able to buy one extra rotating connector but need to wait at least a week to get a second one. I’d really like to work on my projects in the meantime. Does anyone know of a 3d printable file that I could use (temporarily) to connect the 50mm hose to my planer or separator?

 

[onocoffee]

IIRC (and I could be wrong), but doesn't the 50mm hose use the same size connector as the 2.5" hoses on other shop vacs? If that's correct then most any of the 3D files should work.

 

[Coen]

Or just tape it. It's only a week?

Also keep in mind the original is anti static. Keep the 3D printed part on the tool side

 

[kwakefield]

Or just tape it. It's only a week?

Also keep in mind the original is anti static. Keep the 3D printed part on the tool side

The tape solution did cross my mind
Good reminder for the anti-static part!

 

[Picktool]

Or just tape it. It's only a week?

Also keep in mind the original is anti static. Keep the 3D printed part on the tool side

Hey @Coen, is it ok to use PETG-ESD filament?

 

[Coen]

Hey @Coen, is it ok to use PETG-ESD filament?

No experience, but going from the text I would guess that would work.