90 degree adapter for 36mm hose

[JimB1]

Any chance Festool will make a 90 degree adapter for the 36mm hose so you can use it with the mini/midi while still being able to stack systainers on top without hitting or crimping the hose?

Not sure if this will work but something like this for the 36mm hose : http://www.festoolusa.com/products/dust-extractors/reducing-hose-sleeves/hose-sleeve-antistatic-angle-adapter-456806.html
Not sure if this is just a replacement for the 27mm hose since they don't have the specs for what size hose it is for...

-Jim

 

[Administrator_JSVN]

Jim,

The part you've referenced is designed for the 27mm hose. There is no right angle for the 36mm.

Shane

 

[JimB1]

Jim,

The part you've referenced is designed for the 27mm hose. There is no right angle for the 36mm.

Shane

OK, then add that to the wish list

I can't be the only person wanting this. Same part they make for the 27mm hose just in a 36mm size...

Thanks
-Jim

 

[PeterK]

If you go to the shop vac section of a big box store - Lowes if my old memory is any good - they sell an accessory that is a combo 90 degree adapter with a detachable small brush on the end. It is what I use. Think it was about $9.

 

[VictorL]

I do use CT-mini with 36mm hose for house cleaning. Mini's housing hose opening is not designed for 36mm hoses, it's too small you have to squeeze hose. Another thing is that Mini's/Midi's housing is too small for keeping 36mm hoses on board. So I have to keep it off vac.

VictorL

 

[Steve R]

The other part is of this is....is it AS?

Cheers,
Steve

 

[Cableaddict]

Jim,

If you search on the net, you can easily find a 2.25" 90 degree adapter,  even anti-static. 

Just use this, and plug your current Festool hose into it.

 

[Dave Hale]

Jim,

If you search on the net, you can easily find a 2.25" 90 degree adapter,  even anti-static.  

Just use this, and plug your current Festool hose into it.

I'm not finding any hits. Anyone find one at a reasonable price (with a link)?