alluminum extrusion

chayu

Member
Joined
Jan 25, 2008
Messages
21
Greetings,

I would like to buy a long piece of alluminum extrusion for a cross cut table I'm building.

it needs to be 19mm  in thickness (just under 3/4") or a little less is fine.  The width should be at least 2.5" to 3" minimum.

ideally it would accept the flipstops that come with mft fences and kapex extension wings, etc....

any ideas on  which model and where to get it??

Thanks so much for your time.

Brice Madden
 
Thanks very much for your help

The woodpecker super track looks just about perfect!

Brice
 
Back
Top