Attaching sortainer to systainer

[Frank Fletcher]

Can a sortainer be connected to the bottom of a systainer?

 

[Administrator_JSVN]

The short answer, yes.  And each can attach to the tops of CT dust extractors and the SysCart (492388).

Edit: One exception to systainer stacking is the mini systainer (460853) which only stack to other minis.

 

[Corwin]

And here's a pic from my Gallery;

This shows a CT22 with Hose Garage, followed by a Four-Drawer Sortainer and topped off with a Systainer 4,  well, that is if you overlook the paint bucket and what's attached. 

Most any tool in its Systainer is all the better for an attached Sortainer below --  easy access to the tool above and all items (tools, accessories and/or consumables) below.  Can attach to a CT or Systainer Cart, or just to carry connected together to your work --- rather a mix and match affair.  It is late, so I can get away with calling it, "a snap!"

Good Night,
Corwin

Oh, and that ClearVue has seen some upgrades since this pic... now sports 1/2 an AS Connector on each port, copper tape to prevent slugs (and static) and a little paint on the exposed MDF. 

 

[Tinker]

Can a sortainer be connected to the bottom of a systainer?

I supose it could.  But I have always found it much easier to attach to the top.  : ;D
Tinker

 

[Michael Kellough]

Can a sortainer be connected to the bottom of a systainer?

I supose it could.  But I have always found it much easier to attach to the top.  : ;D
Tinker

Good catch Tinker! Where have you been? We missed you.

 

[Tinker]

Can a sortainer be connected to the bottom of a systainer?

I supose it could.  But I have always found it much easier to attach to the top.  : ;D
Tinker

Good catch Tinker! Where have you been? We missed you.

See an earlier (this am) post in membership section
Tinker

 

[nickao]

Corwin that is pretty cool!

Seeing how that system can be broken down I see some benefits.

For anyone not needing to remove their Dust collector from the shop I suggest getting a 2 or 3HP cyclone from Onieda or Grizzly which will blow that set up away and for not much more money. Possibly the same amount of money if you sale shop.

Nickao

 

[Corwin]

No desire for a big cyclone in my current shop -- no way.  But, I might just be getting a bigger shop this year...

This little puppy works great!  Only took a short time to setup once received -- later I did spend a little more time to make it as I wanted.  Don't think I'll be needing many bags in the years to come.  This week my second CT22 will arrive and I'll be able to try out some more new tricks.  Fun.  And after only a year and a half thinking about adding a mini cyclone, I cannot recommend that anyone else wait that long -- just get one.

Oh, and here we were looking at attaching a Sortainer to a Systainer.  Sorry to stray off topic, but hey, it was the only picture I had up at the time.  

Can a sortainer be connected to the bottom of a systainer?

I supose it could.  But I have always found it much easier to attach to the top.  : ;D
Tinker

Good catch Tinker! Where have you been? We missed you.

Yep Tinker, you've been missed.  Haven't gotten to the thread in the membership section yet...  

Corwin

 

[nickao]

My mini is still  sitting here, I wish and time to use set it up and use it. I am going through bags like crazy! I may just go cheap and easy instead of all like you did.