PreferrablyWood
Member
- Joined
- Sep 8, 2013
- Messages
- 972
Ive got a big order coming up, it looks like it will be over €1000 my last order which had a variety smaller items too and one big ticket item was up there too, the big item was HKC set that made the total amount more acceptable psychologically..
This next order contains no power tools that sand or cut or drill. The closest thing to a powertool is the Syslite Kal II.
So what makes this order så expensive? Well the Syslite Kal II costing €160, the new Sleeved 3.5mm 22-27mm hose is relatively expensive. I'm going Sortainer shopping as well, so at 96 euro for the Sys 3 Sort 6 makes the total jump again.. Other than that another battery for the TI impact, somehow they mixed up at my otherwise faultless supplier and sent an 18v 5.2Ah instead of the required 14.4v 5.2Ah i could have them exchange for the proper one, but on second thought I have 5 akku tools with the Carvex HKC, PDC, TI impact, and the Syslite, so another battery so I have 5 18v batteries 2 15v, and the 2 10v 2.6 Ah batteries does not seem to excessive especially if I experience any failures in the middle of a project...
Other than these items I'm getting an extra standard blade for the HKC, the flush piece like a flat parallel guide that improves DC on the HKC, jigsaw blades for the Carvex, a few 100 piece boxes of sand papir for the RS 300 EQ Rotex 90 DX sanders, I'm also getting som Platin 2 abrasive for the Rotex, to try getting a near polish finish on some painted doors and tables..
A few other extra pieces, the quick clamps, sys carts x2
On another order from a different supplier I'm getting one more Sys 4 Sort three and the Sys Combi 2...
Just a little surprised at how fast a list like this grows... Just have to get to grips with the fact that I'm getting consumables and accessories this time and it is costly.. [blink]
This next order contains no power tools that sand or cut or drill. The closest thing to a powertool is the Syslite Kal II.
So what makes this order så expensive? Well the Syslite Kal II costing €160, the new Sleeved 3.5mm 22-27mm hose is relatively expensive. I'm going Sortainer shopping as well, so at 96 euro for the Sys 3 Sort 6 makes the total jump again.. Other than that another battery for the TI impact, somehow they mixed up at my otherwise faultless supplier and sent an 18v 5.2Ah instead of the required 14.4v 5.2Ah i could have them exchange for the proper one, but on second thought I have 5 akku tools with the Carvex HKC, PDC, TI impact, and the Syslite, so another battery so I have 5 18v batteries 2 15v, and the 2 10v 2.6 Ah batteries does not seem to excessive especially if I experience any failures in the middle of a project...
Other than these items I'm getting an extra standard blade for the HKC, the flush piece like a flat parallel guide that improves DC on the HKC, jigsaw blades for the Carvex, a few 100 piece boxes of sand papir for the RS 300 EQ Rotex 90 DX sanders, I'm also getting som Platin 2 abrasive for the Rotex, to try getting a near polish finish on some painted doors and tables..
A few other extra pieces, the quick clamps, sys carts x2
On another order from a different supplier I'm getting one more Sys 4 Sort three and the Sys Combi 2...
Just a little surprised at how fast a list like this grows... Just have to get to grips with the fact that I'm getting consumables and accessories this time and it is costly.. [blink]
