C15 and Ti15 Combo Option

[tjacks66]

I recently purchased the Ti15 Hybrid set 2.5 weeks ago and I'm very pleased with it's impact capabilities. I am remodeling my deck and removed and reinstalled all of the balusters, as well as new 2 x 6s, all on 1 battery. Because I'd like some more torque in drill mode, as well as an additional drill for woodworking, I am looking at the C15 set.

I just discovered that if I had purchased a basic Ti15 it comes in a Systainer 3 that will also hold the C15 set. Since I have a Ti15 set with The Systainer 1, if I buy the C15 Set it looks like i can only get another Systainer 1 with it. Is there any option to buy a C15 set with the modified Systainer 3 so I can add the Ti15 to it that I own? If I had known beforehand 2 weeks ago when I got the Ti15 I would have purchased the basic one then added the C15 set at the same time since I really like the combined storage setup in the modified Systainer 3.

 

[RC]

If nothing else you are still within your 30 days money back period so just return the Ti15 you bought and get a C15 set and the Ti15 basic as a replacement

 

[Brice Burrell]

If nothing else you are still within your 30 days money back period so just return the Ti15 you bought and get a C15 set and the Ti15 basic as a replacement

This is one option, another is to buy the Ti15 basic Systainer/insert as a spare part from Festool. 
I'm pretty sure there is no way to buy a C15 "basic".  If you call around there may be a dealer willing to go the extra mile to accommodate a makeshift C15 basic.   

 

[tjacks66]

Thanks - I'll see if I can get a Ti15 basic insert first.

With the amount of research I did before buying I would have thought I'd catch a Ti15 Basic/C15 set as an option.

 

[Jeff Zanin]

I am currently using the CXS but I've been thinking about the various drills for a while as a replacement for my DeWalt drill / driver.

I finally figured out the TI15 basic a few weeks ago, it is an excellent option if you are getting both a drill and a driver but it isn't at all obvious and it was only by reading something here that I picked up on it.  There is something about it on the Festool (US) product site near the bottom of the page under "Already Own A Festool Cordless Drill?" but I didn't quite get it until I went looking for it.

Good luck with getting the insert as a part, and if you can't I wouldn't hesitate to take advantage of the 30 day return period to get what you want.

Jeff

 

[semenza]

Thanks - I'll see if I can get a Ti15 basic insert first.

With the amount of research I did before buying I would have thought I'd catch a Ti15 Basic/C15 set as an option.

Hi,

Welcome to the FOG!  [smile]

One way or another you will get the arrangement worked out. If you end up with an extra Systainer don't worry, you will find a use for it.  [wink]

Seth

 

[VictorL]

Do you know part number for  Ti15 Basic/C15 set insert? Can't find it in the spare part catalog.

Thanks.

 

[neeleman]

Partnumber for the TI 15 Basic drill which fits a T-Loc SYS 3 is #703202.

 

[VictorL]

Partnumber for the TI 15 Basic drill which fits a T-Loc SYS 3 is #703202.

Thanks a lot!