Christmas Wine Glass Displays

[R.W_Carpentry]

Came across this design on drunkenwoodworker and decided to make a few for small xmas pressies, quite simple and effective I think.[attachthumb=1]

My sister in law then asked if I could make some that hold more glasses, I had a quick look online and found most that held 4 glasses were just square blocks so decided to have a crack at something a bit different and knocked one of these up earlier today.
[attachthumb=2]

 

[wow]

WAY COOL!

This just went on my 'Christmas List' List...

 

[Wonderwino]

Great idea!  I'll be checking to see if I have the right Zobo bit for a wine bottle...

 

[Stoli]

1 1/4" if I remember correctly

 

[sae]

I like it.

Only suggestion I have is maybe a slightly larger chamfer in the final resting spot for the glasses, so it requires a slight lift to remove them?

 

[R.W_Carpentry]

I like the idea of larger chamfer for the glasses, will give that a go on one of the next ones.
Size wise on the holes, I initially used a 16mm for glasses and 32mm for the bottle and found that whilst this worked on some bottles and glasses, I found some bottles and glasses that were tight in these so on others I've been making I've upped the sizes to 18mm and 35mm.

 

[Scott in Bend Oregon]

Cool idea.  From the pictures they look to be about 19mm thick.  Have you considered a thickness in the 13mm to 16mm range for a lighter look?