CNC Router file... Systainer Drawers...

[AtomicRyan]

Hey guys, I am working on another workbench and I'm wondering if anyone has gone to the trouble of creating a CNC file for creating a systainer drawer with routed areas for the feet like this:

Would be easy enough to do obviously, but just thought I'd check to see if anyone has done it...

 

[ColossusX]

I'd be interested too.  But so far I'm going the lazy way and using a hole saw for the foot cutouts. Plus I've contacted 3 local cnc router shops and have not heard back from any of them in regards to sys shelves and mft style tops

 

[Systainer.Store]

Hi [member=63929]AtomicRyan[/member]

I don't have 'CNC' files yet, in fact I'm thinking I'm just about to order a CNC so I can look at creating this items for myself and for the community.  I've played around some with a Shaper Origin and I recall seeing various Festool and Systainer posts on their community site.  Below is a link to a project, with SVG file, that someone used with the Shaper Origin to create what I think you are looking for.  I imagine taking the SVG and importing to generate the tool path/gcode should be quick work.

https://www.shapertools.com/hub/creators/59d417701ca17e0010a3e3b3/shares/5bc7e8a6c26d99001710335d

 

[nclemmons]

Ryan -

If you don't have a Shaper and thus forum access, the SVG file is attached.

FOG won't support SVG file attachments so it's in a ZIP format.

Systainer-Store - good find!  I had seen it in the past there and glad to have it now.

neil

 

[AtomicRyan]

Right on. Thank you sir...

I will run this as well as the one I made and see which fits best. Once done, I'll report back and post mine made for two deep systainers.

 

[fritter63]

I have one that does it, and even bevels the sides as well. Will get it to you once I figure out how to renew my Fusion 360 sub... they really screwed it up.

[attachimg=1]

[attachimg=2]

 

[papester]

Right on. Thank you sir...

I will run this as well as the one I made and see which fits best. Once done, I'll report back and post mine made for two deep systainers.

AtomicRyan,

Can you post your two deep file? I would be interested in looking at it.

 

[Ebuwan]

Hello

Any luck on the two deep file?

Thanks!

 

[Ebuwan]

I made a two deep version of the template by Nelson on the Shaper Hub site, using Inkscape.
https://hub.shapertools.com/creators/5a87449ff1a2ee000f2e4df4/shares/60648f908b3dd10011c20e46

 

[Tradesman Inc]

for the double deep with slides installed whats the total cabinet width?