My second grandson is due next month. I made him a changing table/dresser and, more recently, this crib:
[attachimg=1]
Most of the wood is hard maple. The horizontal rails on the headboard and footboard are maple plywood. I cut long mortises with my Domino 700 about 1.5 inches deep and 14mm wide. A shallow shoulder cut on the plywood rails and a little rounding over of the ends made a nice mortise and tenon joint. The legs are about 2.75 inches square. I would have rather clear finished it but my daughter-in-law specified white. It is finished in white tinted Resisthane.
[attachimg=1]
Most of the wood is hard maple. The horizontal rails on the headboard and footboard are maple plywood. I cut long mortises with my Domino 700 about 1.5 inches deep and 14mm wide. A shallow shoulder cut on the plywood rails and a little rounding over of the ends made a nice mortise and tenon joint. The legs are about 2.75 inches square. I would have rather clear finished it but my daughter-in-law specified white. It is finished in white tinted Resisthane.
