Bob Childress
Member
- Joined
- Apr 4, 2007
- Messages
- 121
Well, I've done the "didn't attach the vac hose" dance a couple of times, most recently with the Domino and wondering why the chips were getting all over the place! :
But my worst was similar to Bob Marino's. Wife's mother had an old freezer that was going rusty on the exterior. Determined to sand it back and re-paint it, I packed up the RO150 and CT-22, and Deltex 93 and drove 6 hours to Virginia, only to discover on unpacking that I had forgotten the adaptor pigtail for the CT22 that allows it to plug to 15 amp circuit! Way out in the country, so no quick trip to anywhere for anything!
Just sanded it down without DC (Ugh!) and used lots of damp rags. What a mess.


But my worst was similar to Bob Marino's. Wife's mother had an old freezer that was going rusty on the exterior. Determined to sand it back and re-paint it, I packed up the RO150 and CT-22, and Deltex 93 and drove 6 hours to Virginia, only to discover on unpacking that I had forgotten the adaptor pigtail for the CT22 that allows it to plug to 15 amp circuit! Way out in the country, so no quick trip to anywhere for anything!
Just sanded it down without DC (Ugh!) and used lots of damp rags. What a mess.

