Birdhunter
Member
- Joined
- Jun 16, 2012
- Messages
- 4,145
I've had my Domino 700 several months and have used it to do bigger projects than my Domino 500 can handle.
I have a problem I've never encountered before with either Domino.
I'm cutting a 8mm mortise 25mm into the end grain of an Ipe board. I'm getting a face full of chips! The 700 is hooked up to a Festool vac and the vac has a fresh bag and has lots of suction. I have a Seneca shim installed on the Domino 700 and I'm using the 15mm depth stop.
Am I doing something wrong?
My next step would be to make a clear plastic shield over the top of the Domino to deflect the debris.
I have a problem I've never encountered before with either Domino.
I'm cutting a 8mm mortise 25mm into the end grain of an Ipe board. I'm getting a face full of chips! The 700 is hooked up to a Festool vac and the vac has a fresh bag and has lots of suction. I have a Seneca shim installed on the Domino 700 and I'm using the 15mm depth stop.
Am I doing something wrong?
My next step would be to make a clear plastic shield over the top of the Domino to deflect the debris.