Mike Goetzke
Member
- Joined
- Jul 12, 2008
- Messages
- 1,139
I'm working on a project but at the same time experimenting with making and using extra wide tenons made with the Woodpecker's half round router bits.
One thing driving me crazy is I like using the DF700 and DF500 cross stops that have 1.0 mm increments but for some reason all the mortises machined from the 700 or 500 end in 1/2 mm widths. WHY DID THEY DO THIS!
Mike
One thing driving me crazy is I like using the DF700 and DF500 cross stops that have 1.0 mm increments but for some reason all the mortises machined from the 700 or 500 end in 1/2 mm widths. WHY DID THEY DO THIS!
Mike