Domino XL & T15 Lubrication

[Ari]

Hey All.

I noticed that my Domino XL and T15+3 came from factory with a little bit of a fine oil on some parts.

After dusting off then I wood like to apply some oil to keep it smooth and as rust protection.

What oil could I use?

Best regards

Ari Cunha

 

[Administrator_JSVN]

The oil you might be noticing could be separation from the grease in the tool(s). Edit: this isn't anything to be concerned about and it will not jeopardize the performance or lifespan of the tool.

If you are going to apply an oil, I'd recommend a light machine oil. But, would recommend that you contact our service department for the best advice.

Shane

 

[Ari]

Shane, thanks a lot for you reply.

I did notice the same kind of lubrication on the Domino extra cutters and they are connected to the tool. So I think it is not separation of the internal grease.

Some times I have a hi volume of uric acid on the hands and every metal I touch gets rusted. That's why I'm concerned about it.

I will try T9 from Boeshield and let you know.

Once again, thanks for your time

Best from

Ari

 

[Administrator_JSVN]

Ari, it may also be something applied to protect against corrosion. I've noticed that on the Kapex rails and other sliding parts before.

 

[Ari]

Thanks Shane !!

 

[leakyroof]

If I'm not using the Boeshield as you mentioned, then I often use Camellia Oil for hand tools and blade edges.

 

[Theshipstore]

Ari. I have been using Boeshield on my Domino,1010 and 1400 rails, Lighty sprayed and then a light wipe off. It has worked well
Sal

 

[Ari]

Thanks Leakyroof. What a good thing to know the Camellia oil thing!!

Sal, great tip.

Best from

Ari