Extreme Fire Restoration - Workshop Guys Must Read!

Scott B. said:
Good point. Concrete dust is no bueno. It's about as hideous as drywall dust.

There's little that's as ugly as seeing someone with silicosis try to breathe when their lungs are full of stone dust turned to concrete.  They suffocate over a long period of time.  There's no surgery that can correct this.  A friend's dad who was a quarryman died of it and it was truly horrifying. 
 
I new someone a long time ago that was a great artist and did a lot of etched glass panels for restaurants, etc.

The etching was done with blown sand. He and his partner were well known experts and had lots of business. They had the right equipment (forced air) and the wrong equipment (mere filtration). Apparently, they each had different levels of personal care and his partner wasn't fond of always using the forced air gear.

His partner died of silicosis at a very young age...

Tom
 
I have written about this before, so won't get into a lot of detail.  I had poured an overlay floor in a garage that was being remodeled into a room.  My supplier (as of about 3pm of that day, they were my EX-supplier) screwed up on delivery.  We poured first load at about 7am and second load was to come a half hour later so in effect, it would be a continuous pour.  At about 10am. i was burning the phone wires.  By 3pm, i cancelled the second load and called another supplier who came immediately.  That company was an hour away, so the load did not arrive until the sun was already disappearing and the bottom was falling out of the thermometer.  I ended up all nite trying to keep a kerosene heater going and trawling til almost daylite.  Needless to say, the finish was somewhat less than desired.

That was during Thanksgiving week.  i went back with terrazzo machine between Chriistmas and New Year.  Sealed off all of the doorways between the floor and main house.  Unfortunately, i forgot the hot and cold air ducts.  I am very fortunate that the owner had sense of humor.  If not, you guys would never have known me.  That cement dust was in every room, between bed sheets, all clothing in closets were saturated. there was hardly any thing in that house that was not white. That is what they came home to after a two weeks ski vacation.  I think the guy's wife was pouring water over his head as he was yelling at me over the phone.  Otherwise, I think height have burned his house down.  And no loose connection in the phone was even involved.

We did remain friends for many more years and I did several more masonry jobs until I went into landscaping.  They even hired me to take care of their property until they moved away. 
Tinker

 
I don't know why it is Tinker, but whenever I am doing a concrete pour, it always seems to be between November and February...
 
[member=7493]Sparktrician[/member]
Thanks for the info on the hood for the grinder. Didn't even think of that route, certainly cheaper than a RAS. Is that hood specific to Dewalt, or is it a "universal" type?

[member=13337]Scott B.[/member]
Sorry if I hijacked the thread but it has been interesting. From fixing a burned house to learning about LiIon battery issues to "stab-in" electrical connections to finding a hood for my grinder. Another 20 minutes of discussion and we'll probably solve world hunger.

Seriously, this whole electrical/battery thing is something we all take for granted. I know this little exercise has opened my eyes and I'm going to check all the cords, connections, and any battery that's fully charged will be taken off the charger. How many times has a battery been left on the charger for weeks/months at a time. The LiIon batteries can only self-destruct if they are charging or discharging. When taken off the charger they become impotent.

One last note, learned today that 3 Tesla's ($70k-$110K) have also burned to the ground [eek] now let's get back to the burn-house...
 
Not a hijack at all, good contributions by everyone.

As to the burn house, I won't be back to it til monday.

If anyone wants to learn how to lay down a show room quality flecked epoxy floor on concrete... [scared]
 
Scott B. said:
Not a hijack at all, good contributions by everyone.

As to the burn house, I won't be back to it til monday.

If anyone wants to learn how to lay down a show room quality flecked epoxy floor on concrete... [scared]

Yes, I was going to ask you that yesterday after I looked at the video you posted using the RAS. But I forgot...just getting old.
 
Cheese said:
[member=7493]Sparktrician[/member]
Thanks for the info on the hood for the grinder. Didn't even think of that route, certainly cheaper than a RAS. Is that hood specific to Dewalt, or is it a "universal" type?

The one referenced is for DeWalt, but mine is a universal type, also found on Amazon.  I had previously tried my RAS on the concrete, but the concrete won over the abrasives, so I went with the diamond cup wheel on my DeWalt grinder, with the dust hood, of course. 
 
Metabo and Bosch grinders have a dust shroud that have a flip-up top to allow for flush cutting up to a wall.

The RAS is a 500 watt sander, I doubt you'd be able to do any real work with a RAS. The Bosch is a 1250W grinder, the Metabos are 1450W or 1700W.



 
[member=7493]Sparktrician[/member]
Thanks Willy,
I'll take a look at Amazon.
 
sae said:
Metabo and Bosch grinders have a dust shroud that have a flip-up top to allow for flush cutting up to a wall.

The RAS is a 500 watt sander, I doubt you'd be able to do any real work with a RAS. The Bosch is a 1250W grinder, the Metabos are 1450W or 1700W.





Thanks [member=38144]sae[/member]
That's a great post, sometimes when we sit around late at night, we tend to relax and over indulge in the green coolaid. Went down stairs and noted that the 5" Milwaukee I use is a 14 amp grinder. That equals 1800 watts. You're correct, as much as I enjoy Festool products, it's no comparison to what I need. I'll probably be looking for in this order:
1. A universal dust hood that sparktrician suggested for the Milwaukee and if that doesn't get the job done, then...
2. The Metabo 1700 W grinder.
 
So, here is the flecked epoxy basement floor. The basement will be the workshop for the homeowner, as it was before the fire...

[attachimg=1]
 

Attachments

  • flecked.JPG
    flecked.JPG
    68.8 KB · Views: 423
It's the same floor finish we have in our shop...bullet proof.

[attachthumb=1]
 

Attachments

  • floorfleck.JPG
    floorfleck.JPG
    28.6 KB · Views: 215
Scott B. said:
So, here is the flecked epoxy basement floor. The basement will be the workshop for the homeowner, as it was before the fire...

Which product is it?  I may be getting a basement floor to do soon. 
 
Sparktrician said:
Scott B. said:
So, here is the flecked epoxy basement floor. The basement will be the workshop for the homeowner, as it was before the fire...

Which product is it?  I may be getting a basement floor to do soon.

Sherwin Williams Armor Seal 1000. Spendy but bomber.
 
Sparktrician said:
Scott B. said:
Sparktrician said:
Scott B. said:
So, here is the flecked epoxy basement floor. The basement will be the workshop for the homeowner, as it was before the fire...

Which product is it?  I may be getting a basement floor to do soon.

Sherwin Williams Armor Seal 1000. Spendy but bomber.

Thanks!

An equivalent product at a better price point is H&C Concrete Epoxy. I have that on some of my own stuff and many customers. Very good product.
 
Scott B. said:
Sparktrician said:
Scott B. said:
Sparktrician said:
Scott B. said:
So, here is the flecked epoxy basement floor. The basement will be the workshop for the homeowner, as it was before the fire...

Which product is it?  I may be getting a basement floor to do soon.

Sherwin Williams Armor Seal 1000. Spendy but bomber.

Thanks!

An equivalent product at a better price point is H&C Concrete Epoxy. I have that on some of my own stuff and many customers. Very good product.

Thanks again!
 
Back
Top