Fence Dogs with MFT3 and Incra Track System

[thedevme]

Looking for pics to see if anyone has used these Fence Dogs with the 52" Incra Track System.  I would like to purchase and use with 2 MFT3 tables but do not want to waste my money.  I've seen that they are compatible but I can not find one picture that actually verifies these claims. Thank you
https://benchdogs.co.uk/collections/frontpage/products/fence-dogs

 

[simonh]

I posted a picture here with the Fence Dogs and Incra 52" rail on an MFT
http://festoolownersgroup.com/festo...-table-cut-repeatability/msg566900/#msg566900

 

[thedevme]

Thank you so much I don't know how I missed it must have not put in the right keywords - going to order them now.

 

[thedevme]

Thanks [member=67413]box185[/member]

 

[jeffm13]

The fence dogs are great.  I purchased two pair and I'm very happy with them.  I started out using them with a 30x60mm extrusion from Misumi Engineering on a home-made mft assembly bench.  I have since added a standard MFT fence from Festool (30mm is a bit tall for some operations).  The fence dogs work great with both. I did use some 6mm Misumi nuts with the Misumi extrusions because they're a bit bigger. But the nuts supplied with the fence dogs fit in the channels on the Festool fence just fine. [attachimg=1]

 

[thedevme]

The fence dogs are great.  I purchased two pair and I'm very happy with them.  I started out using them with a 30x60mm extrusion from Misumi Engineering on a home-made mft assembly bench.  I have since added a standard MFT fence from Festool (30mm is a bit tall for some operations).  The fence dogs work great with both. I did use some 6mm Misumi nuts with the Misumi extrusions because they're a bit bigger. But the nuts supplied with the fence dogs fit in the channels on the Festool fence just fine. [attachimg=1]

[member=39425]jeffm13[/member] I actually just got mine in last week and I love them as well - I bought two one for my table and another for my ripping table.  They also work with the Incra fence as well.